FIP (FLS) graphite or platinum online conductivity electrode sensor probe C150; C200

Product Introduction

FIP (FLS)C150-200Conductivity sensors use graphite or high-resolution platinum ring technology. Durable epoxy resin body structureapproveEnsure the robustness and reliability of the sensor. Utilizing the built-in temperature sensor（Pt100）And the monitor/The transmitter'sATC(Automatic temperature compensation) function, these sensors provide accurate high-resolution measurement results. They can be used for laboratory and industrial applications. The sensor electrodes are well protected, so the conductivity cell constant is not easily damaged by solids. According to the required operating range, three conductivity cell constants can be provided. The use of a simple and reusable filler cap allows for cost-effective online installation of electrodes, while the one equipped with an extension tube”of3/4”The joint is sufficient for immersiontypeInstallation. useinstallThe kit can install these probes onFIPTType of pipe fittings andFIPOn the saddle clamp.

application

•Chemical concentrate

•Food industry

•evaporation

•Metal Finishing and Mining

•textile industry

•Pulp and Paper Manufacturing

•water treatment

•reverse osmosis

•Softener regeneration

•Deionization

•distillation

•aquaculture

•Agricultural and Fertilization Systems

Main characteristics

•Graphite or platinum measurement surface

•Suitable for laboratory, industrial or portable applications,

But the liquid needs to be filtered

•Online and Immersion Installation

•Including temperature sensors

•follow0.1 - 10The conductivity cell constant option

technical data

general rule

•Scope of operation:

- C150.01 TC, C200.01 TC:0.1 µS/cmto2000 µS/cm(10 MΩ*cmto500 Ω*cm)

- C150.1 TC, C200.1 TC:1 µS/cmto20000 µS/cm

- C200.10 TC:10 µS/cmto200000 µS/cm

•Temperature compensation equipment（TCMode):Pt100

•Cable length:5rice(16 ft.)

•Electrode distance controller (no signal adjustment):≤20rice(66 ft)

•Process connection:

-Online installation:

Thread Joint”perhaps¾”

FLSInstall accessories

Immersion installation

•Working temperature:0°C - 70°C（32°F - 158°F）

•working pressure:≤7 bar (100 psi)

•Welding materials:

-Body: Epoxy resin

-Measurement surface: graphite（C150Edition) or Platinum（C200Version)

FIP (FLS) C150-200Graphite or platinum conductivity sensor probemodel: C150.01; C150.1; C150.01TC; C150.1TC; C200.01; C200.1; C200.10; C200.01TC; C200.1TC; C200.10TC