-
E-mail
xaori@163.com
-
Phone
13924595112
- Address
Product Categories
Shenzhen Xiaorui Technology Co., Ltd
FP0R-E16T FP0R-E32T Panasonic FP0R Series Programmable Logic Controller
NegotiableUpdate on 11/02
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
FP0R-E16T FP0R-E32T Panasonic FP0R Series Programmable Logic Controller
Product Details
Panasonic FP0 series programmable controller FP0-E16T/FP0-E32T
MIL connector type
|
Product Name |
rules |
Order Product Number |
||||
|
I/Opoints |
power supply voltage |
Enter specifications |
Output specifications |
|||
|
FP0-E16 |
32point |
Enter 8 points |
― |
DC24V |
transistor output |
0.1A |
|
AFP03343 |
Product Name |
rules |
||||
|
Order Product NumberI/O |
points |
power supply voltage |
Enter specifications |
|||
|
Output specifications |
32Expansion Unit |
point |
Output 16 points |
― |
± Public end |
NPN |
0.1A
AFP03543
specialty1. Small size W25 × H90 × D60mm. （※）Compared to typical small PCs in terms of size, it can be combined with machines
control
Contribute to the miniaturization of control units.
The width of the 32 point control unit is W30mm.
2. It can be expanded to a maximum of 3 units with 128 points.
Adopting a stacked expansion method that does not require cable extension. With the expansion of 3 units, the width is only 105mm, which is very space saving.3. High speed computation with a scanning time of approximately 1ms.The 500 step program can be processed in just 1ms. The processing speed can fully meet the requirements of small size
PLC
The demand.4. Match the terminal shape of the small body.
relayThe output type adopts the European terminal block method.Wiring operations can be carried out after disassembling the terminal block. For batch production equipment, equipped with Molex
Connector typeTerminal.
The transistor output type comes with scattered wires
connector5. The latest product with a program capacity of 10K has been launched.Standard equipped
Calendar hanging clock
And RS232C port.
Two batteries were used to backup the computational memory.
| The control unit is only 25mm, and even extends to 128 I/O points, with a width of only 105mm. |
※
The width of the I/O 32 point control unit and S-LINK control unit is 30mmThe minimum size of the control unit is W25 × H90 × D60mm.Additionally, it can be expanded up to a maximum of 128 points. The current size is W105 × H90 × D60mm. The ultra small exterior design breaks people's previous perception of small PLCs. From the perspective of installation area, it refers to machinery and equipment
The control panel
| Miniaturization has made a contribution. |
There are three installation methods to choose from. |
DIN rail installation
|
Direct installation on the surface (※)
|
※ Cannot be used for expanding modulesUp to three expansion units can be used. The stacking method does not require any cables.The expansion unit can be directly connected to the control unit. Expansion units can use surface expansion |
|
connectorBy locking a single row of contacts, a stacked system can be formed without the need for special extension cables, baseboards, etc.Regardless of the end block
|
|
Still a connectorOnly the mobile terminal part can be easily wired. |
|
|
FP0-C10RS、C10CRS、C14RS、C14CRS、E8RS、E8YRS、E16RSconnectorIt is very convenient to combine during mass production |
|
|
FP0-C10RM、C10CRM、C14RM、C14CRM、E8RM、E16RMMIL |
FP0-C16T、C16CT、C32T、C32CT、T32CT、E8X、E8YT、E16X、E16YT、E16T、E32T
The program memory uses EEPROM, and the program can even be modified during operation!
Has the function of rewriting programs in RUN
When FPO is running, such as during program error correction and startup debugging, the program can be rewritten.
No need for backup batteries
The program memory uses EEP-ROM. The program and internal content can be stored without the need for backup batteries, and even encoding the machine's coding program is safe.
Password function
The password function is designed only for modifying programs. Only authorized personnel can modify the program, so the program is more secure than before.
Executing each basic instruction requires only 0.9 μ s of high-speed computation. Satisfied the need for high-speed response.
High speed execution
The execution speed of each basic instruction is 0.9 μ s. The 500 step program only requires 1ms of scanning time, which means that FPO's running speed is the fastest among similar products.Pulse capture functionIt can capture pulses as short as 50 μ s and can be used for
sensor
The input.
Interrupt input functionAccurate execution, unaffected by scanning time.Adopting 2-axis independent positionsControl methodBuilt in corresponding to PWM output
High-speed counter
.Pulse output function (limited to transistor output type)Equipped with 2 channels, the maximum pulse output is 10kHz. (5kHz for 2-channel output) can be independently operatedcontrolTherefore, it can correspond to the purpose of independent position control with 2 axes. Equipped with automatic trapezoid
|
|
controlThe dedicated instructions for returning to the origin and running JOG are very simple to set.Use automatic trapezoidcontrolAfter instruction, position
|
|
|
controlIt has become so simple!high-speed
countThe functionSingle phase is equipped with 4 channels, while 2-phase is equipped with 2 channels. In the case of single-phase, the total of 4 channels is 10kHz; In the case of 2 phases, the total frequency of 2 channels is 2kHz. This counting speed can be used for frequency converters
|
|
control
Wait.PWM output function (limited to transistor output type)Because it is equipped with PWM output (pulse width modulation output), simple temperature control can be achieved through a compact FPO
|
|
control
.
The serialization of control units with RS232C ports.
|
|
| By using the RS232C port, the operation indicator panel and computer can be directly connected. In addition, bidirectional data exchange with RS232C devices such as barcode readers is also very simple. |
| ※※In the port section, connect through 3 terminals S.R.G. The operation indicator panel can be connected through the programming port. |
In relay type
|
The control units with transistor output are equipped with RS232 ports. |
|
Dial switch of the host
Corresponding to various I/O ranges, it is very easy to use.FPOs that can be directly connected to the provincial distribution system S-LINK have also been serializedThe energy-saving wiring/construction function of S-LINK with T-shaped branch can enable
|
|
control
The miniaturization of the panel has been achieved. Capable of inputting 64 points and outputting 64 points of S-LINK
|
|
Control the I/O device. In addition, up to 3 FPO expansion units can be expanded to achieve efficient I/O configuration.
FP Web Server unit, which can monitor the operation of FPO from a web browserBy connecting the FP Web Server unit to FPO via RS232C using dedicated software (FP Web Configurator)After setting up the tool, the operation of FPO can be monitored from the computer's web browser.
|
|
If C-NET is used, multiple FPOs can be used as data collection terminals.If using our company's C-NET network and dedicated adapters, multiple FPOs can be connected in the form of multiple transmission lines through 2-wire cables. It can also be used as a decentralized platform for using computerscontrolAnd the use of network terminals for centralized management systems.PCWAYIn order to access information from the internet |
|
Similar Product Recommend
