-
E-mail
sales@omgl.com.cn
-
Phone
18688887615
-
Address
Room 903, 9th Floor, East Tower, Tianyu Plaza, 625 Tianhe Road, Tianhe District, Guangzhou City
Product Categories
- Dytran 3225F series miniature accelerometer
- FUTEK LLB215 Micro Thread Button Force Sensor
- FUTEK LCM300 axial force sensor
- FUTEK LSB205 anti fatigue micro S-type force sensor (tension and pressure sensor)
- FUTEK LTH300 Hollow Force Sensor
- FUTEK LSB302 S-type tensile sensor
- Sherborne T935 series single axis tilt sensor
- Dytran 3224C Ultra small High Temperature Charge Acceleration Sensor
- FUTEK LSB205 anti fatigue micro S-type tension sensor (tension pressure sensor)
- FUTEK LCM300 axial tension sensor
- FUTEK LCM100 axial tension sensor
- FUTEK MBA500 Column Two Axis Force Sensor
- Sherborne LSOC-P "L" series tilt sensor
- Sherborne LSOP series tilt sensor
- Dytran 5384 VIBRASCOUT ™ 6-degree-of-freedom USB vibration monitoring system
- FUTEK LLB250 Micro Button Force Sensor
- FUTEK MAU300 manual transmission force sensor
- Sherborne T233 series dual axis tilt sensor
- Sherborne T435 L series single axis tilt sensor
- Sherborne LSW series waterproof tilt angle sensor
Guangzhou Oumaizhi Sensing Technology Co., Ltd
FUTEK LCM100 axial tension sensor
NegotiableUpdate on 11/04
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Range 9.8~111.2 N, rated output: 1mV/V~2mV/V, nonlinearity: ± 0.5% R.O., natural frequency: 19~42KHz, hysteresis: ± 0.5% R.O., safe overload: 150% R.O., operating temperature: -50~93 ℃
Product Details
characteristic:
High frequency response
Low deformation
Small installation height
The outer diameter is only 9.5mm
17-4 PH stainless steel structure
Dual directional tensile and compressive forces
Metal foil strain gauge technology
Application:
Cable tension measurement
Biomedical research testing
Product Introduction
The LCM100 sensor is an ultra miniature axial tension sensor designed for fatigue testing and bi-directional tension compression applications. The standard LCM100 miniature axial tension sensor has a super strong structure, made of 17-4 stainless steel, with external threads on both ends of the sensor, and a 1.5-meter-long # 34 Awg 4-core edited shielded cable. The weight of LCM100 is only 8.5g, certified by CE and RoHS.
The LCM100 miniature axial tension sensor has high accuracy. Its linearity is only ± 0.5%, and the deformation is only 0.025-0.05mm. The standard LCM100 tension sensor can be customized according to your requirements, and our inventory covers most of the range and can be shipped within 24 hours. Like other force sensors, LCM100 is produced in the United States and uses metal foil strain gauge technology.
Product Specifications |
|||||
performance |
|||||
range |
9.8,22.2,44.5,111.2N |
||||
nonlinear |
±0.5% of RO |
||||
Hysteresis |
±0.5% of RO |
||||
non-repeatability |
±0.1% of RO |
||||
electrical | |||||
rated output |
1~2 mV/V |
||||
motivate |
7 VDC |
||||
Output resistance |
350 Ohms nom |
||||
insulation resistance |
≥500 MOhm @ 50 VDC |
||||
cable |
#29 AWG 4-core braided shielded silicone rubber cable, 1.5 meters long |
||||
mechanical | |||||
weight |
8.5 g |
||||
overload protection |
150% of RO |
||||
material |
stainless steel |
||||
Protection level |
IP64 |
||||
Operating Temperature | |||||
Operating temperature |
-50 to 93 ℃ |
||||
compensation temperature |
16 to 72 ℃ |
||||
Temperature drift zero point |
0.02% of RO/°C |
||||
Temperature drift range |
0.02% of Load/°C |
||||
calibration | |||||
Calibration voltage |
5 VDC |
||||
Calibration (standard) |
Pull towards 5 o'clock |
||||
Similar Product Recommend
