FUTEK LTH300 Hollow Force Sensor

NegotiableUpdate on 11/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Range: 222~4448 N, rated output: 2 mV/V, nonlinearity: ± 0.5% R.O., hysteresis: ± 0.5% R.O., safe overload: 150% R.O., operating temperature: -50~93 ℃, excitation (DC/AC): 18 V

Product Details

characteristic:

Fast dynamic response frequency

Sturdy cable outlet connector

Low deformation

17-4 Stainless Steel Structure

Multiple range and inner diameter sizes to choose from

Application:

Bolt pre tightening force test

Force and torque measurement of electric nut wrench

Product Introduction

LTH300 is a hollow type force sensor designed for applications such as press or axial pressure testing. The standard model LTH300 force sensor is made of 17-4 stainless steel, which is sturdy and durable. Its inner diameter can be selected between 3.18 and 9.52mm. The cable is a 3-meter-long 29 AWG 4-core PTFE shielded cable. You can also choose the corresponding sensor signal output interface according to your requirements.

FUTEK's LTH series hollow force sensors have the characteristics of high accuracy and good stiffness. Its linearity is ± 0.5%, deformation is 0.05mm, and the working temperature ranges from -50 to 93 ° C. This standard LTH300 force sensor can be customized according to your requirements, and our inventory covers most of the range and can be shipped within 24 hours. Like other force sensors, LTH300 is produced in the United States and uses metal foil strain gauge technology.

Product Specifications
performance
range	222,445,1112,2224,4448 N
nonlinear	±0.5% of RO
Hysteresis	±0.5% of RO
non-repeatability	±0.5% of RO
electrical
rated output	2 mV/V
motivate	18 (VDC or VAC)
Bridge resistance	700 Ohm nom
insulation resistance	≥500 MOhm @ 50 VDC
cable	#34 AWG 4-core braided shielded silicone rubber cable, 3 meters long
mechanical
weight	57 g
overload protection	150% of RO
material	stainless steel
Protection level	IP64
Operating Temperature
Operating temperature	-50 to 93 ℃
compensation temperature	15 to 72 ℃
Temperature drift zero point	0.005% of RO/°C
Temperature drift range	0.005% of Load/°C
calibration
Calibration voltage	10 VDC
Calibration (standard)	5 o'clock pressure direction