Ferrite content detector, General Manager of Lister Hubei, Germany

German List Hubei General Agent Ferrite Content Tester FERRITE-CHECK 240

New probeHigh sampling rate, all signals from the probe are digitized to achieve interference free and accurate measurements. Accurate data with good repeatability,The detection range is as low as 0.2.

highlightLCD color touch panel, easy to operate, with a resolution of 320x480 pixels. Equipped with a rubber protective cover, displaying FN or Fe%Measurement results.

Measure the ferrite content in the weld seamEspecially for welded duplex steel, it is important to know whether the weld seam has sufficient ferrite content to ensure its strengthDegree. If the ferrite content is low, the weld seam is more prone to cracking when heated, but if the ferrite content is too high, the toughness of the weld seam will decreaseSex and extensibility will be lost.

Rapid and continuous measurement of ferrite contentThe FERRITE-CHECK 240 ferrite content detector can accurately and quickly determine the ferrite content. Detecting lightWhen sliding or polishing the weld seam on the surface, the instrument can be switched to scanning mode. When the probe is placed on the surface and moved along the surfaceWhen in motion, the readings will be continuously stored and statistical data of the minimum, maximum, and average values of the measurement series will be displayed.

Calibrate the ferrite content detectorFERRITE-CHECK 240 ferrite content detector is equipped with 3 calibration standard plates, which can be traced back toNIST

remote operationImplemented on the deviceSCPIInterface, which allows devices to perform remote measurements and transmit measurement values during line operations. throughpassUSBConnecting ensures continuous measurement of power supply.

data outputThe instrument can communicate with a Windows PC and use the Lima Connect application to obtain measurement resultsStatistical evaluation and graphical display, the application is free.