Freezing shaker incubator

Freezing shaker incubatorIt is a biochemical instrument that combines a temperature controlled incubator and an oscillator. It is a laboratory equipment used for precision cultivation and preparation in scientific research, education, and production departments such as plants, biology, microbiology, genetics, viruses, environmental protection, and medicine.

1Freezing shaker incubatorOperation Instructions:

1Using at medium speed within the speed range can extend the lifespan of the instrument.

2The instrument should be placed on a flat ground, with a clean and tidy environment, moderate temperature, and good ventilation.

3Open the lid of the box and place the culture test bottle. In order to ensure good balance performance of the instrument during operation and avoid generating large vibrations, install it

All test bottle positions should be filled, and the culture medium in each bottle should be roughly equal. If the number of culture bottles is insufficient, the test bottles can be placed symmetrically

Or fill the test bottle with empty spaces filled with other equal amounts of solution.

4After the container is installed, close the lid, turn on the power, and turn on the power switch (green key). At this time, the switch indicator light will turn on.

5Setting of cultivation temperature:

If temperature control is required, set the desired temperature on the temperature controller. The operating instructions for the temperature controller of this machine can be found in the "Intelligent Temperature Control"

Operation Manual ".

6Setting of oscillation speed (using a constant speed controller to better control the rotational speed):

1）First, turn on the oscillation switch (green key) on the machine, and a number will be displayed on the speed control gauge100, indicating the beginning

The set speed is100rpm(The set value when our factory leaves the factory). Press the "" (speed) key to set the speed, and then

RUNPress the (start) button to start the machine, and it will take approximately30It will slowly start up to the set speed within seconds. If you want to set

200rpmPress the "" key to display the rotational speed200rpmJust enough.

2）If you need to stop the local machine during operation, simply pressSTOPPress the key again to restartRUNThe key.

7Lighting settings: If lighting is required, turn on the lighting switch (green key). Install a three eye socket.

8After use, the oscillation speed should be adjusted firstzuiLow and turn off the oscillation switch and temperature control switch, then turn off the main power.

Freezing shaker incubatorIt is a biochemical instrument that combines a temperature controlled incubator and an oscillator,It is a laboratory equipment used for precision cultivation and preparation in scientific research, education, and production departments such as plants, biology, microbiology, genetics, viruses, environmental protection, and medicine.

two、Freezing shaker incubatorKey Features:

1Temperature control, digital display.

2Open oxygen replenishment holes and ensure sufficient oxygen replenishment in the constant temperature working chamber.

3Equipped with mechanical timing and intelligent timing for temperature control.

4Using a one-time molded beaker fixture or a universal spring fixture.

5Infinite speed regulation ensures smooth operation. Easy to operate and safe.

three、Freezing shaker incubatorTechnical Specifications:

1Speed range:0—280r/min

2Temperature control range:5—50℃ (maximum achievable)60℃）

3Temperature control fluctuation: ±0.5℃

4Uniform temperature control: ±1.5℃

5Temperature control accuracy:0.1℃

6Amplitude:20mm

7Heating power:600W

8Oscillatory timing:0—120min(or normally open)

9Temperature control timing:0～9999hour

10Power supply:220V 50Hz

four、Freezing shaker incubatorNotes:

1To ensure safety, please connect the ground wire when using.

2The instrument should be kept clean and dry, and liquids are strictly prohibited from entering the machine.