Multi functional high and low temperature wet heat alternating test chamber

1Multi functional high and low temperature wet heat alternating test chamberboxIt is mainly used for high and low temperature resistance testing of electronic, electrical, and component products, to detect the quality and reliability of the products.
1. The equipment is made of high-quality materials, processed and formed using advanced processing equipment, and the surface of the shell is sprayed with plastic for a beautiful and smooth appearance. Arc shaped design, with smooth and natural lines. The control box is located on the right side of the equipment, making it convenient for users to operate the control interface.
2. The inner liner is made of imported high-quality stainless steel plate. The indoor sample rack and other accessories are made of stainless steel material, with a reasonable design and durability. All designs of the equipment comply with national standards, making it more practical and easy to control based on experimental simulation. It is easy to install, operate, maintain and clean on a daily basis.
3. The equipment casing is processed and formed using high-quality steel plate CNC machine tools, and the surface of the casing is sprayed with plastic for a smoother and more aesthetically pleasing appearance.
4. The box door is equipped with a transparent window for observing changes in the indoor sample. The observation window is made of three-layer hollow tempered glass with a laminated conductive film on the inside, which has the advantages of transparency, insulation, and is not prone to steam frosting.
5. The refrigeration system equipment is installed at the bottom with a Taikang compressor to ensure cooling effectiveness and reliability.
6. Double layer high tensile sealing strips with high temperature resistance are used between the door and the box of the equipment to ensure the sealing of the testing area.
7. The test hole (on the left side of the machine) can be used for external testing power or signal lines (aperture).
The control part of the equipment is designed on the right side of the device, with temperature controllers, control switches, etc. distributed, making it easy to operate, simple, and maintain.
IIMulti functional high and low temperature wet heat alternating test chamberTechnical Specifications
Model: KM-BL-HS150L
Specification: See above
Temperature range: -38 ℃ to+100 ℃ (150 ℃)
Humidity range: 20% to 98% R.H
Temperature uniformity: ≤± 2 ℃ (when unloaded)
Humidity uniformity: ≤+2%~-3% R.H
Temperature fluctuation: ≤± 0.5 ℃ (when unloaded)
Humidity fluctuation: ≤± 2%
Temperature deviation: ≤± 2 ℃ (when unloaded)
Humidity deviation: ± 2.5% R.H (humidity ≥ 75% R.H) ± 3% R.H (humidity ≤ 75% R.H)
Cooling rate: 0.5-2.0 ℃/min
Heating rate: 1.0-3.0 ℃/min
Time setting range: 0-9999 hours
Power supply: single-phase three wire system/three-phase five wire system AC220V/380 ± 10%, 50 ± 0.5Hz
总功率： 5.5KW/6.5KW/8.5KW/11KW/12KW
Noise: ＜ 65dB
IIIMulti functional high and low temperature wet heat alternating test chamberStructural characteristics and configuration
The test box body is in the form of an integral structure, and the control system is located on the right side of the test box.
Inside the air duct interlayer at one end of the studio, there are devices such as heaters, humidifiers, and fans distributed;
On the left side of the test box, there is a cable hole with a diameter of 25/50/100mm
4Multi functional high and low temperature wet heat alternating test chamberAfter-sales service
1. If the product cannot function properly due to manufacturing quality issues within twelve months from the date of shipment, provided that the user complies with the product installation and usage rules, our company will provide free maintenance for the user
2. For products outside the warranty period, our company provides long-term technical services
3. After sales service response time: within 24 hours