GDGW52

Features: Fully PTFE sealed antenna, resistant to strong acid and alkali corrosion.
Application: Acid and alkali tanks with shorter measuring ranges.
Large distance: 6m
Measurement accuracy: ± 10mm
Process connection: PTFE flange
Detection component material: PTFE
Steel rod diameter: Φ 10mm
Process temperature: -40... 150 ° C
Process pressure: -1.0... 16 bar
Signal output: two-wire system 4... 20mA/HART

Detailed introduction:
GDGW52
license
P standard type (non explosion proof)
I intrinsic safety type (Exia IIC T6)
C Intrinsic Safety Type+Marine License (Exia IIC T6)
G intrinsic safety type+explosion-proof type (Exd [ia] ia IIC T6)
Detecting component type/material
A-rod/PTFE
Process Connection/Materials
GP flange DN50 PN1.6 stainless steel 316L (GB/T9119-2000)
NP flange DN80 PN1.6 stainless steel 316L (GB/T9119-2000)
EP flange DN100 PN1.6 stainless steel 316L (GB/T9119-2000)
FP flange DN150 PN1.6 stainless steel 316L (GB/T9119-2000)
YP special formulation
process temperature
A （-40～150）℃
electronic component
B (4-20) mA/HART two-wire system
C (4-20) mA/(22.8-26.4) V DC/HART two-wire/four wire system
D (198-242) V AC/HART four wire system
Shell/protection level (note)
Aluminum/IP67
B Plastic/IP66
D aluminum two chamber/IP67
G stainless steel 316L/IP67
Cable incoming line
M M20x1.5
N ½NPT
On site display/programming
A belt
X without
Cable (rod) length
4-digit number (unit: mm)
Note: The intrinsic safety type (Exia IIC T6) is only compatible with "B" electronic components and "A" type enclosures; The intrinsic safety+marine license (Exia IIC T6) is limited to the use of "B" electronic components and "G" type enclosures; The intrinsic safety+explosion-proof type (Exd [ia] ia IIC T6) is limited to the use of "C" and "D" electronic components and "D" type enclosures; The standard flange size refers to GB/T9119-2000 PN1.6MPa size, with a thickness of 15