GDGW53

Features: Coaxial guided wave antenna, obtaining smaller blind spots and stronger echo signals.
Application: Can adapt to the measurement of small range, multi vapor, and low dielectric constant media. Adapt to environments with complex process conditions.
Large distance: 6m
Measurement accuracy: ± 10mm
Process Connection: G1 Half A/G2A
Detection component material: stainless steel 316L/PTFE
Coaxial outer diameter: Φ 28mm
Process temperature: -40... 150 ° C
Process pressure: -1.0... 40bar
Signal output: two-wire system 4... 20mA/HART

Detailed introduction:
GDGW53
license
P standard type (non explosion proof)
I intrinsic safety type (Exia IIC T6)
C Intrinsic Safety Type+Marine License (Exia IIC T6)
G intrinsic safety type+explosion-proof type (Exd [ia] ia IIC T6)
Detecting component type/material
A coaxial/stainless steel 316L
Process Connection/Materials
GP thread G1 Half A
KP thread G2A
NP thread 1 half NPT
YP special formulation
Sealing/process temperature
Viton fluororubber/(-30~150) ℃
B Kalrez perfluorinated rubber/(-40~150) ℃
electronic component
B (4-20) mA/HART two-wire system
C (4-20) mA/(22.8-26.4) V DC/HART two-wire/four wire system
D (198-242) V AC/HART four wire system
Shell/protection level (note)
Aluminum/IP67
B Plastic/IP66
D aluminum two chamber/IP67
G stainless steel 316L/IP67
Cable incoming line
M M20x1.5
N ½NPT
On site display/programming
A belt
X without
Cable (rod) length
4-digit number (unit: mm)
Note: The intrinsic safety type (Exia IIC T6) is only compatible with "B" electronic components and "A" type enclosures; The intrinsic safety+marine license (Exia IIC T6) is limited to the use of "B" electronic components and "G" type enclosures; The intrinsic safety+explosion-proof type (Exd [ia] ia IIC T6) is limited to the use of "C" and "D" electronic components and "D" type enclosures; The standard flange size refers to GB/T9119-2000 PN1.6MPa size, with a thickness of 15