GFM-KLP series medium flow Coriolis mass flowmeter

GFM-KLP series medium flow Coriolis mass flowmeter

Overview

The GFM-KLP series Coriolis mass flowmeter is based on the Coriolis principle to achieve direct and precise measurement of fluid mass, without the need for any conversion or correction of pressure, temperature, viscosity, density, etc. Its structure consists of two parts: a sensor unit and a transmitter unit. The instrument is designed and manufactured according to the national standard for safety and explosion-proof type, and the explosion-proof mark isExdib[ib]IIBT5。

Coriolis mass flowmeter can directly measure the mass of fluids with high accuracy（0.1%~0.2%）Widely applicable(Can measure various non Newtonian fluids, slurries, suspensions, high viscosity fluids, etc)It has the characteristics of low installation requirements (not high requirements for the front and rear straight pipe sections of the instrument), reliable and stable operation, and low maintenance rate.

instrument parameters

1. Scope of application: Suitable for measuring small mass flow rates of liquids, gases, liquid-solid, and gas-solid

2. Measurement tube material:304 or 316Lstainless steel

3. Pressure rating: The standard configuration is shown in the table below, and other high pressures can be ordered specifically.

4. Medium temperature:-50℃～+150℃：-50℃～

250℃；-50℃～350℃；-100℃～350℃

5. Environmental temperature:-20℃～+70℃

6. Flow measurement accuracy:±0.20%traffic±[(zero stability/flow value)×100]%traffic （±0.1%For special orders)

7. Density measurement accuracy:±0.002g/cm³

8. Repeatability:±0.10%traffic±[½(zero stability/flow value)×100]%traffic

9. Output signal:4～20mAload resistor<500Ω(Instantaneous flow or density optional);0～10kHzInstantaneous flow pulse signal; 485 communication signal

10. Explosion proof mark for sensors:Exib(ib)IIBT2-T5

Explosion proof mark for transmitter:Exd(ib)ibIBT5