Gas turbine sub high efficiency filter

Product IntroductionThe function and function of a gas turbine air filter is to filter out dust particles in the air, allowing clean air to enter the gas turbine from the intake system, ensuring the safe and reliable operation of the gas turbine generator set for power generation. If the quality of the air filter is poor and causes filter blockage, it will reduce the intake of the gas turbine, lower the output power and thermal efficiency of the gas turbine generator set. If the filtration efficiency of the air filter is too low, dust particles in the air will enter the gas turbine, causing the compressor blades to become dirty and increasing the power consumption of the unit, reducing the output power of the gas turbine generator set, and increasing the number of times the compressor blades are washed with water, which will affect the power generation of the gas turbine generator set. In addition, dust particles in the intake can cause impact damage to the compressor blades of gas turbines, and even cause gas turbine surge, seriously affecting the performance and safe operation of the unit and shortening its service life. That is why we must strictly select qualified air filters, and at the same time strengthen the maintenance and upkeep of the intake air filters of gas turbines to ensure the required air volume and air quality for the operation of gas turbine generators, in order to improve the output power of gas turbine generators and enhance the economic benefits of power generation.

1Product Features

1The product structure is firm and sturdyThe product has good filtering effect.

2Large filtration area, large dust holding capacity, and long service life.

3Low resistanceHigh air volume and good uniformity of wind speed.

4FEATUREResistance to impact, high pressure, and high wind speed.

IIComposition materials and operating conditions

1Outer framePlastic frame.

2Protective netEight sided red protective net to prevent damage to the filter element when impacted.

3filter materialHigh dust holding capacity, special stamping resistant and high-pressure resistant fiberglass filter material.

4partitionSuper adhesive hot melt adhesive.

5Sealing glue and gasketEnvironmentally friendly polyurethane AB adhesive, EVA sealing strip or seamless foam sealing ring.

6Increase in air volumeBy increasing the height and number of folds of the filter, the filtering area can be increased, thereby increasing the air volume.

7Use maximum temperature and humidity80 ℃, 80%.

IIICommon product specifications, models, and technical parameters