Gear Pump_CB Gear Pump - Gear Pump Manufacturer

The purpose of stainless steel circular gear pump is to transport lubricating oil or other liquids with properties similar to lubricating oil that do not contain solid particles and fibers, are non corrosive, have a temperature not higher than 200 ℃, a viscosity of 5 × 10-6~1.5 × 10-3m2/s (5-1500cSt), and are used in hydraulic transmission systems.

The purpose of stainless steel circular gear pump is to transport lubricating oil or other liquids with properties similar to lubricating oil that do not contain solid particles and fibers, are non corrosive, have a temperature not higher than 200 ℃, a viscosity of 5 × 10-6~1.5 × 10-3m2/s (5-1500cSt), and are used in hydraulic transmission systems.

Application scope of gear pump:

Can be used as a transmission and booster pump in oil transportation systems;

A fuel pump that can be used for delivery, pressurization, and injection in the fuel system;

Can be used in hydraulic transmission systems to provide hydraulic powerhydraulic pump;

It can be used as a lubricating oil pump in all industrial fields.

Structural features:

Stainless steel circular gear pumps are mainly composed of gears, shafts, pump bodies, pump covers, bearing sleeves, shaft end seals, etc. The gear is manufactured with a double arc sine curve tooth profile. Compared with involute gears, its outstanding advantages are that there is no relative sliding of the tooth profile during the gear meshing process, so there is no wear on the tooth surface, smooth operation, no liquid phenomenon, low noise, long service life, and high efficiency. This pump breaks free from the constraints of traditional design, allowing gear pumps to enter a new field in design, production, and use. The pump is equipped with a safety valve as overload protection, and the full reflux pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, please note that this safety valve cannot be used as a pressure reducing valve for long-term operation. If necessary, it can be installed separately on the pipeline.

The pump shaft end seal is designed in two forms, one is mechanical seal and the other is packing seal, which can be determined according to specific usage and user requirements.

When viewed from the extended end of the main shaft towards the pump, it rotates clockwise.

Haoge (Wuhan) Hydraulic Pump Electromechanical Science and Technology Company isWuhan hydraulic pump、Wuhan hydraulic piston pump、Wuhan hydraulic pump maintenanceManufacturer andWuhan hydraulic motor,Hydraulic motorrepair,piston pumpA professional hydraulic pump company that integrates accessory sales with strong technical strength in hydraulic pump maintenance. With high-quality hydraulic pumps, we are highly trusted by our customers and welcome inquiries