HI83226 multi parameter rapid measurement

Some parameter indicators in swimming pools, such as residual chlorine, total chlorine, acidity, etc., need to be monitored daily. Chlorine is usually used as a water quality agent in swimming pools, and its effectiveness depends on the acidity of the water. If these indicators are not regularly monitored and checked, some of the resulting microorganisms will pose a threat to human health. In addition, if the chlorine content in water is too high, not only will other chemicals be produced, but the water will also emit unpleasant odors and irritate the eyes. Cyanuric acid is commonly used as a stabilizer for chlorine in water, and is more commonly used in swimming pools or heated pools during summer. The control of alkalinity and hardness in the swimming pool is equally important, as these two indicators maintain a normal acid-base balance in water quality and prevent water from deteriorating or settling.



• Quickly measure 11 important project indicators
• Quickly store measurement data and access it at any time
The measuring slot can effectively avoid light interference
LCD display screen with backlight function
BEPS low battery protection system
USB data interface, can be connected to a computer for data transfer
• On screen assistance information, gradually guiding the completion of various operations
• Powered by batteries or 12VDC, convenient for laboratory and on-site use

model	HI 83226
measurement parameters	range	method	Reagent code
Total alkalinity	0 to500mg/L（CaCO3 计）	colorimetry	HI93755-01
bromine	0.00 to 10.00 mg/L Br	DPD	HI93716-01
residual chlorine	0.00 to 5.00 mg/L	DPD	HI93701-01
Total chlorine	0.00 to 5.00 mg/L	DPD	HI93711-01
Copper surplus	0.00 to 5.00 mg/L	N-diglycinate method	HI93702-01
Total Copper	0.00 to 5.00 mg/L	N-diglycinate method	HI93702T-01
Cyanuric acid	0 to 200 mg/L	Turbidity colorimetry	HI93722-01
calcium hardness	0 to 500mg/L （CaCO3 计）	colorimetry	HI93756-01
iron	0.00 to 5.00 mg/L	EPA 315B Standard Method	HI93721-01
ozone	0.00 to 2.00 mg/L	colorimetry	HI93757-01
pH	6.5 to 8.5 pH	Phenol red colorimetric method	HI93710-01
optical system	Tungsten lamp light source, narrowband filter, silicon photovoltaic cell, wavelength 525nm, 575nm
data storage	200 sets of data, various data related information; USB data interface
power supply method	Built in rechargeable battery or 230Vac/12VDC, 50-60Hz power adapter
Applicable Environment	0 to 50℃； RH 30 to 95% (non condensing)
Size and weight	235 × 200 × 110mm; 640g (host)
International Certification	CE Certification