HIOKI FT3151 proposed grounding resistance meter

NegotiableUpdate on 02/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

HIOKIFT3151 significantly improves the efficiency of pre preparation and post organization work. It is an analog grounding resistance meter that intuitively grasps measurement values through pointer vibration

Product Details

Significantly improved the efficiency of pre preparation and post organization work

HIOKI FT3151 is an analog grounding resistance meter that intuitively grasps measurement values through pointer vibration. On the basis of the old product, the auxiliary grounding rod and measurement code wheel in the attachment have been upgraded, which can greatly improve the work efficiency of users in the early preparation and later organization.

The necessity of measuring grounding resistance

Grounding generally refers to the connection between electrical equipment and the ground. Grounding is an essential method to prevent electric shock when electrical equipment malfunctions or deteriorates.
Grounding is achieved by burying the electrode underground, and the resistance between the electrode and the ground is called grounding resistance. From a safety perspective, it is necessary to ensure that the grounding resistance is below the standard value. So in order to confirm the safety of grounding, it is necessary to measure the grounding resistance.

measurement method
Three line measurement method (suitable for A~D types of measurements)/Two line measurement method (suitable for D types of measurements)

Product Features

The auxiliary grounding rod is thinner than the old product, improving work efficiency
When measuring the grounding resistance, it is necessary to insert the auxiliary grounding rod underground. The auxiliary grounding rod of the old product is relatively thick and must be hammered in with a hammer, and it is also difficult to remove it. The auxiliary grounding rod of FT3151 is thinner than before and can be easily pulled out by hand. Therefore, it has improved work efficiency.
Equipped with a simple coiling device as standard, it improves work efficiency during early preparation and later organization
The most troublesome part of measuring grounding resistance is the preparation and organization of the measuring line. The measurement of grounding resistance requires the use of a 10-20m measuring wire to connect the measuring instrument and an auxiliary grounding electrode inserted underground. Due to the fact that the old product only rolls the measuring wire into the code plate, each test wire needs to be prepared by crawling on the ground, and the test wire needs to be rolled into the code plate by hand.
The testing line of FT3151 comes standard with a coiler. By holding two spools with both hands, you can pull out the test wire at the same time, so you can prepare two at the same time. Moreover, it can be directly wound back into the rewinder, achieving twice the speed of previous products to organize the testing line. Therefore, it has achieved an improvement in work efficiency during the early preparation and later organization.

The above content is the information on the day of release. There may be changes in parameters and other aspects in the future, please be aware.