HRV-02 series vertical semi volumetric heat exchanger

HRV-02 series vertical semi volumetric heat exchanger HRV-02 series vertical semi volumetric heat exchanger 1. Product features: HRV-02 series vertical guide type semi volumetric heat exchanger (water heater, heat exchanger) is designed according to the national building standard design atlas, 16S122 "Selection and Installation of Water Heater"

HRV-02 series vertical semi volumetric heat exchanger

HRV-02 series vertical semi volumetric heat exchanger 1、 Product features: The HRV-02 series vertical diversion type semi volumetric heat exchanger (water heater, heat exchanger) is designed according to the national building standard design drawings, 16S122 "Selection and Installation of Water Heaters". Design, produce, and manufacture domestic hot water heat exchange and storage equipment. There are the following performance characteristics: 1. This is a fast heat exchanger (where the initial hot water enters near the heat exchange element) with a high heat transfer coefficient and large heat transfer capacity. 2. The water storage section stores hot water for 10-20 minutes, with stable water pressure, safe water temperature, and comfortable water use. 3. This product can use the working pressure of the hot water circulation pump in the hot water pipe network to maintain the water temperature in the tank when the water consumption is minimal or not in use, so that the heat exchange part is always in a state of being heated by water flow during heat exchange, ensuring sufficient heat exchange. 4. The main recommended materials for the shell and U-shaped heat exchange tube bundle of this product are stainless steel and copper tubes, which completely solves the problem of severe corrosion inside the shell. 5. Small in shape and lightweight, the internal heat exchange components of the equipment include U-shaped heat exchange tube bundles that can be pulled out horizontally for easy installation and maintenance, making it an ideal device for centralized supply of domestic hot water. 6. The shell material of the heat exchanger is made of stainless steel, outer carbon steel lined with copper plate, or outer carbon steel lined with stainless steel plate anti-corrosion composite material. The U-shaped heat exchange tube bundle is made of high-quality copper or stainless steel tubes; 2、 Product types and specifications: The HRV-02 series has 11 specifications ranging from 0.8m3 to 5.0m3 by volume integration. Each specification can be based on the type of pipe side heating source: steam or high-temperature hot water. Each model is divided into two types of heat exchange areas, A and B, according to different heat exchange capacities, to meet the needs of hot water in different working conditions. At the same time, customized non-standard designs can also be provided according to the specific requirements of the project. 3、 Applicable occasions: The HRV-02 series has 11 specifications ranging from 0.8m3 to 5.0m3 by volume integration. Each specification can be based on the type of pipe side heating source: steam or high-temperature hot water. Each model is divided into two types of heat exchange areas, A and B, according to different heat exchange capacities, to meet the needs of hot water in different working conditions. At the same time, customized non-standard designs can also be provided according to the specific requirements of the project. 4、 Heat exchanger number description: HRV-01 (02) - N-xxxx/xxxx, where HRV refers to the semi volumetric heat exchanger 01 refers to the horizontal type, and if it is 02, it refers to the vertical type. N refers to the total volume (m3), which is represented by the design pressure of the pipe side and the design pressure of the shell side, respectively.