HX-651 Smoke and Dust Heating Sampling Tube

product description

This product is mainly used to capture particulate matter in low-temperature and high humidity flue gas ducts. Due to the low temperature and high humidity gas being drawn into the sampling tube, the generated water vapor will wet the filter cartridge, which is prone to damage during the extraction process. In addition, a large amount of condensed water will accumulate in the sampling gun, and the condensed water mixed with the collected dust will easily scale and block the extraction tube. This product can effectively avoid these problems. Due to the uniform heating of the filter cartridge and the entire exhaust pipe, there will be no condensation water generated in the sampling gun during the entire sampling process.

Execution standards

HJ/T 48-1999 Technical Conditions for Smoke and Dust Samplers

Product Features

The entire sampling tube is made of titanium alloy, which is lighter and more corrosion-resistant compared to stainless steel

The filter cartridge and exhaust pipe are heated simultaneously, and wet flue gas cannot condense anywhere inside the sampling pipe

Aluminum alloy handle with built-in temperature controller, can be operated by connecting the power supply

Fast heating, short heating time, saving sampling time

Suitable for measuring holes with a diameter of 80mm as specified in standard GB/T16157

Sampling tubes can be customized according to filter cartridges (No. 1, No. 2, No. 3, heavy metals)

Suitable for flues below 200 ℃

The length of the sampling tube can be customized

TECHNICAL INDEX