Hanging pipe rain test room

Hanging pipe rain test room

This rain test equipment is mainly used to assess whether the casing and sealing components of electronic and electrical products can ensure good working performance of the equipment and components after or during water testing The manufacturing process of this rain shelter is exquisite, and the exterior decoration is luxurious. It is composed of a water storage tank, a glass wall, a sprinkler system, a rotating disc, etc. Implement a rain test for one machine with multiple controls ranging from IP3 to IP6 levels, all completed on one control system. Compliant with standards: GB/T2423.38-2005<Basic Environmental Test Procedures for Electrical and Electronic Engineering>GB4208-2008, IEC60529:2001 standards.

IP3、 4. Swing tube rain test device

Main technical parameters:

1. Swing tube radius: maximum 1500mm

2. Swing range: -90 to+90 °, adjustable arbitrarily

3. Spray hole size: 0.4mm, 0.8mm

4. Spray hole center distance: 50mm

5. Wall thickness of the swing tube: 2mm

6. Pressure: 100-300KPA

7. Run time control: 1 second to 99 minutes (with an alarm prompt when the experimental time is up)

8. The swing pipe adopts seamless stainless steel pipe

9. Water cleaning treatment: three-stage filter screen treatment, easy to disassemble and clean the filter screen

10. Equipped with water pressure gauge and flow meter

11. Water supply: water recycling

IPX5、 6. Flushing test device

Main technical parameters:

1. Water spray aperture: IP5 diameter 6.5mm, IP6 diameter 12.5mm

2. Spray hole center distance: 180mm

3. Spray nozzle: 1 nozzle, 12 nozzles are IP5 and IP6 respectively (implemented on one pipe, can be controlled separately)

4. Rotation angle: -80 to+80 °

5. Spray control: IP5 and IP6 can be individually controlled

6. Spray pipe diameter: 1 inch

7. Spray pressure: 80-100kpa

8. Spray duration: adjustable

9. Run time control: 1S-99min (adjustable, with an alarm prompt when the experiment time is up, and a buzzer added)

10. Water circulation system to ensure the recycling of water sources

11. Affected by water surface: product top, sides, front, back

12. Water cleaning treatment: three-stage filter screen treatment, easy to disassemble and clean the filter screen

13. Equipped with water pressure gauge and flow meter

14. Water supply: reusable (with automatic water replenishment function, no water alarm, and shutdown)

turntable

1. Table size: diameter 800mm

2. The distance between the tabletop and the ground is 500-600mm, and the height can be adjusted

3. Product fixation: Design professional fixed installation fixtures

4. Rotary table rotation: 360 ° rotation

5. Bearing capacity: 300KG

control system

Adopting self-developed programming control system, the operation mode of the rain testing system from IP3 to IP6 levels is fully programmed. At runtime, simply call up the IP level test content and set the conditions to run the entire process. Its control interface is a color touch screen and a human-machine dialogue interface. The four rain modes only need to be implemented on one control system. Experiment time to real-time alarm function.

Structural material configuration

This equipment is a combination rain test device, consisting of a water storage tank, a swing pipe rain test device, a water spray test device, and a sample turntable.

1. Total dimensions of the laboratory: length 3000 x width 3500 x height 2000mm

2. Water storage tank: depth 250 x length 1500 mm x width 1500 mm (cleaned by filter, automatically refilled)

Material: SUS304 stainless steel plate

3. Spray system: composed of water pump, nozzle, spray nozzle, pressure gauge, flow meter (water meter), solenoid valve, etc

4. Storage tank cover: used as a walking platform when closed

5. Wall: Glass Wall

5. Sample turntable: motor rotation synchronous belt wheel structure

6. Ground: Professional floor tiles

7. Spray nozzle: SUS304 # stainless steel pipe

8. Nozzle: Made of SUS304 # stainless steel

9. Motor: Joint venture motor

10. Water circulation system: Lingxiao brand water pumps, pressure reducing valves, pressure gauges, etc. are all selected from internationally renowned brand products

11. Electrical materials: Fuji AC contactors from Japan, Omron intermediate relays from Japan

Hanging pipe rain test room Hanging pipe rain test Hanging pipe rain IPX waterproof test

Hanging pipe rain test room

IP3、 4. Swing tube rain test device

Main technical parameters:

1. Swing tube radius: maximum 1500mm

2. Swing range: -90 to+90 °, adjustable arbitrarily

3. Spray hole size: 0.4mm, 0.8mm

4. Spray hole center distance: 50mm

5. Wall thickness of the swing tube: 2mm

6. Pressure: 100-300KPA

7. Run time control: 1 second to 99 minutes (with an alarm prompt when the experimental time is up)

8. The swing pipe adopts seamless stainless steel pipe

9. Water cleaning treatment: three-stage filter screen treatment, easy to disassemble and clean the filter screen

10. Equipped with water pressure gauge and flow meter

11. Water supply: water recycling