Hangzhou - Salt Spray Test Chamber

TECHNICAL AGREEMENT

※ Product Usage Introduction

The salt spray test chamber is an artificial climate simulation environmentOne of the "three prevention" (damp heat, salt spray, mold) testing equipment, it is an important testing equipment for the adaptability and reliability of various environments after surface treatment of products in scientific research, mechanical manufacturing, national defense industry, light industry electronics, instruments and other industries.

Commonly used industries: automotive parts, electroplating, coatings, electronic components, protective coatings for metal materials, and salt spray corrosion testing for industrial products.

※ Advantages of company products

1The entire unitPVCBoard made, using advanced three-dimensional reinforcement technology internally, with a strong and solid structure that never deforms

2Using automatic technology/Manual water addition system, capable of automatically adding water when the water level is insufficient/The function of manually replenishing the water level will not be interrupted during the test.

3Precision glass nozzle, use4000Ensure no crystal blockage within hours.

4The control instruments are all on the same board, easy to operate, and clear at a glance.

5Equipped with dual over temperature protection and low water level warning to ensure safe use.

※ Product Technical Parameters

Laboratory size（mm）：1200*900*500 mm

Carton size ：1670*1480*970

electricity Source:AC1ø 220V 50HZ

Usage temperature: Depending onCNS、JIS、ASTMCan be customized:

Salt water test method:（1）Laboratory:35℃±1℃

（2）Saturated air tank:47℃±1℃

Corrosion resistance test method:（1）Laboratory:50℃±1℃

（2）Saturated air tank:63℃±1℃

Control system:（A）Laboratory temperature control0~99.9℃ accuracy0.1℃ (dual digit display)

（B）Heating tank liquid expansion safety temperature controller0~110℃2only

（C）Saturated air tank temperature controller0~99.9℃, accuracy01℃ (even number display)PIDcalculation

（D）Time controller:0~9999hr

Primary pressure regulating valve: with pressure gauge attached1Group (adjust pressure first)2~2.5㎏f/cm²）

Secondary pressure regulating valve: Taiwan made pressure regulating valve1/4”PT, pressure0~4.0㎏f/cm² Adjustable (spray pressure regulated at1.0kgf/cm²）

Safety device:（A）Water level controller1group

（B）Status warning light3only

（C）Overtemperature protection switch2group

other; （A）Storage stick after work1Group (Acceptable)2KgTest samples within

（B）Naclreagent500gdress2bottle

（C）5Kiloliter saltwater mixing tank1only

（D）80cmStandard collection cup1only

（Ｅ）５０ｍLmetering cylinder1Only.