High pressure parallel synthesis reactor

High pressure parallel synthesis reactor

Detailed configuration specifications: Primitives[Shrink*12/30ML*220 ℃ * High pressure parallel magnetic synthesis reactor * Reflux*High pressure reaction below 6MPa*Online vacuum pumpingBelow 0.1MPa*Each test tube can be individually controlled*Safety protection * Cleanable cleanroom * Water and gas source platform]+Function item [Intelligent heating magnetic stirrer IKA-RCT/Domestic Magnetic Stirrer]
Main technical parameters: (are the conventional indicators of this type of instrument product)
Advantageous technical indicators: (for indicators that are superior to similar imported products)
Basic Parameters:
1 Reaction site: /12 digits
2 Reaction vessel: 12 digits: 30 ML high voltageTest tube size: diameter22mm*156mm(Single port high-pressure test tube)
3、Applicable volume: 5-30 ML
4、 Scope of application: Magnetic stirring reactionhigh temperature and high pressureReaction, reflux reaction, gas reaction, anhydrous and anaerobic reaction, airbag hydrogenation reactionBelow 6MPa、High vacuum reaction-Below 01MPa, current gas extraction can be achieved.

5 Independent temperature zone: 1 pieceheatTemperature control zone
6Thermal conduction method: Solid state conduction module
7 Overnight experiment: yes
8 Reflux efficiency: Reflux efficiency≥90%Ethanol is heated and refluxed at 80 ℃ for 48 hours, with a loss rate of ≤15%）
9 Condensation method 1: Water free air condensation (suitable for slight reflux of high boiling point solvents,B.P.≥80℃）
10Condensation method two: external tap water cooling or external ethanol low-temperature circulating liquid (suitable for high-temperature reflux of low boiling point solvents,B.P.≤80℃）

11. Can it be used for low-temperature reaction: The 12 position low-temperature circulating liquid pump can be used for low-temperature reaction within minus 20 ℃.
12Connection method: threaded portLock (new design experience, traditionalthreaded portConnection and clip,The high-pressure test tube adopts a threaded connection,Ensure the lock is tight and prevent sticking