Camera testing: ● Adopting a 7-inch 1920x1200IPS high-definition full view IPS capacitive touch screen, with higher brightness, the camera image display is smoother and clearer; NEW ● Dual Gigabit Ethernet ports, supporting 10/100/1000M rates, can be connected to cameras at any time or simultaneously, improving efficiency. It can provide a bidirectional data transmission rate of 2000M, enhancing network transmission performance

Camera testing:
Adopting a 7-inch 1920x1200 IPS high-definition full view IPS capacitive touch screen, with higher brightness and smoother and clearer camera image display; NEW
● Dual Gigabit Ethernet ports, supporting 10/100/1000M rates, can be connected to cameras at any or simultaneously, improving efficiency. It can provide a bidirectional data transmission rate of 2000M, enhancing network transmission performance. NEW
Intelligent fast charging technology, it only takes about 2.5 hours to fully charge, achieving 10 minutes of charging and half an hour of construction, better increasing work efficiency. NEW
New hardware decoding, supporting H.265 decoding. The camera, in H.265/H.264 encoding mode, has a main stream test image resolution of up to 4K and can test 1200W network cameras; NEW
Upgraded version of ONVIF generates camera test reports with one click, including camera IP address, resolution, encoding, and other related information; Support multi network segment testing; Add custom modification channel names and support PTZ control for network ball machines; NEW
● Supports coaxial high-definition 4.0, TVI8MP, CVI8MP, AHD8MP, EX-SDI8MP camera image testing, coaxial video control, and menu calling, supporting photography, recording, zooming, and playback; NEW
Simulated high-definition level comprehensive testing, hardware high-speed sampling and processing technology, precise measurement of video peak to peak value, synchronous level, and burst level, one click generation of test reports, comprehensive coaxial high-definition and analog video, one click link, one click output. NEW
The new Hikvision testing tool supports batch activation, batch modification of IP addresses, modification of username and password parameters, and the addition of custom modification of channel names. Three font sizes can be adjusted freely, and camera time can be displayed in custom positions for greater convenience. Can restore factory settings, etc. NEW
The new Dahua testing tool supports batch activation of Dahua cameras, batch modification of IP addresses, reservation of phone numbers for password retrieval, addition of custom modification channel names, and the ability to modify parameters such as usernames and passwords; NEW
● Multi channel preview, supporting up to 16 cameras for simultaneous preview, one click link to ONVIF to play images. NEW
Advanced link monitoring, supporting Ethernet statistics, error frame statistics, frame length statistics, network port loopback testing, etc. NEW
12V power test, which can measure the voltage, current, and power of the camera power supply. Real time monitoring of the working status of the camera when powered by a 12V power supply, one click generation of test reports, and saving of test values. NEW
● Support HD-SDI/EX-SDI/3G-SDI camera image testing, including photography, recording, zooming in, and playback;
● Support CVBS circuit testing, instrument circuit sends and receives CVBS color bar signals, and quickly tests BNC cables; NEW
● Simulate video image display, PTZ pan tilt control, image enlargement, photography, video recording, playback and other functions;
● Pioneering the function of simulating video color bar output, supporting circuit testing, instrument sending and receiving CVBS color bar signals, and quickly testing BNC cables.
Innovative coaxial high-definition video transmission quality testing; NEW
Supports HDMI digital signal input, with a maximum resolution of 1080P, supports audio input, image display, video recording, photography, and playback. Supports HDMI signal output, can output the current screen display content through output, and the output resolution can be switched between 720P or 1080P; NEW
● One screen dual display, simultaneous testing of network camera and analog camera;
One click video automatically scans camera IP and redirects to ONVIF, automatically logs in and plays camera images;
● Support Dahua, Hikvision ACTi、 IPC private protocol testing for over 80 network camera manufacturers including Samsung;
● Support network PTZ control function (ONVIF), swipe up, down, left, right, etc. with gestures to control pan tilt rotation;
● PoE DC48V power output, maximum power 25.5W;
● 12V 3A DC power output; Other functions:
● Dual port Ethernet cable TDR test, testing parameters such as cable pair status, length, attenuation, reflectivity, impedance, and delay deviation; NEW
Test the voltage and power of devices such as PoE switches and PoE cameras, and test the voltage and power of DC12V power input and DC12V output of the instrument itself; NEW
New TDR breakpoint and short circuit testing, displaying both curve graphs and numerical values simultaneously. The curve graphs can be scaled and moved, and the benchmark can be moved to more accurately locate cable fault points. NEW
New digital multimeter with simultaneous display of numerical values and dashboard, supporting one click generation of test reports and saving of test values. NEW
BNC attenuation test, hardware high-speed sampling processing technology, real-time testing of coaxial cable attenuation values. Plug and play, refer to the table for comparison. NEW
Enhanced line finder with a brand new appearance, indicator light and knob style volume adjustment key, with a stronger sense of technology; There are two modes: digital and analog. The new digital mode has stronger anti-interference ability, rejects noise, and provides more accurate line finding; NEW
● PoE voltage measurement, PING, IP address scanning, port flashing, and other network testing functions;
● Added PPPOE dial-up function, which can perform PPPOE dial-up internet detection; NEW
● Quick dropdown menu, one click to activate related functions. Customize shortcut menu, press the button to immediately call up the menu, reducing tedious operations; NEW
Built in wireless WIFI function, can test wireless network cameras, supports creating WIFI hotspots; NEW
● Screen projection function, install the Engineering Treasure screen projection APP, or install VLC player on PC and mobile phones to receive real-time Engineering Treasure screen images, making it convenient for monitoring and installation personnel to share information; NEW
A brand new system that allows users to install and run mobile client software from IPC manufacturers, as well as install APK format QQ, WeChat, or other applications; NEW
● Support quick screenshot function, long press the confirm button to capture the screen image, used to save various test reports or quickly capture camera images; NEW
The instrument can rotate 180 degrees to display, making it easy to connect network cables and power cords;
● Support playback of 4K high-definition video recording files; NEW
Enhanced Ethernet cable testing, testing the sorting and continuity of Ethernet and telephone lines. The testing box has a special number (customized) that can be used to search for cable ends;
It can simultaneously integrate functions such as TDR cable breakpoint and short circuit measurement, digital multimeter, optical power meter, and red light source fault location;
5V 2A power output, can be used as a mobile phone power bank function;
● Audio input and output functions;
● Application tools such as flashlights, calculators, music players, etc;
Application software supports customers to upgrade and update themselves;
Large capacity polymer lithium battery power supply, with a working time of up to 10 hours