IPX7-IPX8 immersion test chamber

NegotiableUpdate on 02/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

IPX7-IPX8 immersion test chamber

Product Details

IPX7-IPX8 immersion test chamber

The IPX7-IPX8 immersion test chamber is based on the enclosure protection level (IP code), mainly used to test the relevant IP protection performance of electronic products, LED products, lamps, electrical cabinets, communication, digital equipment, transportation vehicles, and other products under simulated conditions of immersion in water. The test results are used to determine whether the enclosure protection performance of the product can meet the requirements, in order to provide design, research and development, optimization, and factory inspection for the product.

Create Chinese quality instruments with the spirit of craftsmanship

technical specifications

PRODUCT MODEL	L	LS-UP-512/1.2	LS-UP-512/3.4	LS-UP-512/5.6	LS-UP-1000/3.4
Inner box size (mm)	wide	800	800	800	1000
	tall	800	800	800	1000
	deep	800	800	800	1000
Outer box size (mm)	wide	1150	1150	1150	1350
	tall	1760	1760	1760	1960
	deep	1150	1150	1150	1350
Water spray pressure	/		80kpa~400kpa	30kpa~1000kpa	80kpa~400kpa
Spray flow rate	1mm/min~ 3mm/min		0.1Lmm/min~ 0.6Lmm/min	12.5mm/min~ 100Lmm/min	0.1Lmm/min~ 0.6Lmm/min
Swing tube radius	/		200mm、400mm	/	200mm、400mm
Swing tube diameter	Ф0.4mm		Ф0.4mm Ф0.8mm	Ф6.3mm Ф12.5mm	Ф0.4mm Ф0.8mm
Nozzle Spacing	20mm		50mm	2500mm~3000mm	50mm
Drip range	600*600mm		/	/	/
Pipe swing amplitude	/		± 600, ± 900, ± 1700	/	± 600, ± 900, ± 1700
Swing rod speed	About 600/s
Inner diameter of swing rod	/		Ф15mm	Ф15mm	Ф15mm
Test bench diameter	Ф400mm		Ф400mm	Ф1000mm	Ф400mm
Test bench speed	1rpm		4~17rpm	/	4~17rpm
Test bench load capacity	≤15kg		≤15kg	≤15kg	≤15kg
Test water temperature difference	optional