-
E-mail
2259938953@qq.com
-
Phone
18656860316
-
Address
Room 608, Building 1, No. 348 Huajiang Road, Jiading District
Product Categories
Shanghai Fatai Precision Instrument Co., Ltd
Imported dew point meter
NegotiableUpdate on 01/01
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The EA2-TX-100 dew point meter, an imported dew point meter, is an OEM product from the UK based manufacturer, Misier Easidew. Especially suitable for detecting nitrogen and compressed air in pipelines. Imported dew point meter
Product Details
Imported dew point meter
The design concept of Easidew transmitter is simplicity and ease of use, and its integrated features are designed to simplify installation and usage services as much as possible. The transmitter that has been set up and calibrated makes dew point measurement as easy as temperature and pressure measurement, and can be directly integrated into your air or gas management and control system.
·Two wire power supply circuit connection
·Dew point unit or ppm moisture content unit
· IP66(NEMA 4)
·Excellent sensor protection
·Range -100~+20 ° C
·Working temperature -40~60 ° C
·Fast response speed
Imported dew point meterTechnical Specifications:
| performance | |||||||||
| Dew point range | -Dew point at 100~+20 ° C | ||||||||
| Dew point accuracy | ± 2 ° C dew point | ||||||||
| response time | T95 is 5 minutes (from dry to wet) | ||||||||
| repetitiveness | Dew point at 0.5 ° C | ||||||||
| Input/Output | |||||||||
| output signal | 4-20 mA (two-wire) active output, customizable dew point across the full range -100 ~ + 20°C | ||||||||
| power supply voltage | 12–28 V DC | ||||||||
| Resistive load | Big 250 Ω @ 12V | ||||||||
| current consumption | 20mA large | ||||||||
| The impact of power fluctuations | ±0.005% RH/V | ||||||||
| Working condition requirements | |||||||||
| Operating Temperature | -40 ~ +60°C | ||||||||
| Operating Humidity | 0– RH | ||||||||
| work pressure | 大 45 MPa (450 barg) | ||||||||
| traffic | 1 ~ 5 Nl/min， Installed inside the standard sampling sleeve; | ||||||||
| temperature coefficient | Temperature compensation has been made within the working temperature range | ||||||||
| mechanical properties | |||||||||
| Sealing protection level | The corresponding standard for IP66 is BS EN 60529:1992, | ||||||||
| Shell material | stainless steel | ||||||||
| size | L=132mm x ø27mm | ||||||||
| Mounting Thread | 5/8' - 18 UNF | ||||||||
| weight | 150g | ||||||||
| filter | HDPE protective cap | ||||||||
| electrical connection | See the table | ||||||||
| interchangeability | Sensors are interchangeable | ||||||||
| Fault Overview |
|
Similar Product Recommend