Imported liquefied gas shut-off valve

Product Name:	Imported liquefied gas shut-off valve	Product Model:	Buhrer series
Drive mode:	Manual, electric, pneumatic	Connection form:	flange
Structural form:	through-type	Sealing structure:	PTFE,PPL, hard seal
Pressure range:	1.0MPa-4.0	Nominal diameter:	DN15-300
Common materials:	WCB, 304316, alloy steel, etc	Technical Consultation:

Product Introduction The imported liquefied gas globe valve produced by Breyer can be driven manually, electrically, or pneumatically. The connection method can be flange, and the structural form can be straight through. The sealing structure can be PTFE, PPL, or hard seal, with a pressure range of PN1.0MPa-4.0 and a nominal diameter of DN15-300mm. The material can be WCB, 304, 316, alloy steel, etc. Due to the wide range of valve applications, the same type of valve can have different combinations in different situations and working conditions. If you are a non professional, please feel free to call our company for consultation. Our company has professional technical personnel to serve you! Technical Department Phone: Product Details

Imported liquefied gas shut-off valve-American Buhrer brandAs a control medium cut-off opening and closing device. Product use: This globe valve uses elastic V-shaped polytetrafluoroethylene or DQ rubber as the dynamic sealing packing, and is initially sealed by a packing cover/stainless steel spring. The sealing performance of the packing is enhanced with the increase of medium pressure, that is, it has self sealing performance and does not require manual maintenance. Different from other valves, it is suitable for most high and medium pressure gas transmission pipelines, mixing stations, storage and distribution stations, and other occasions.

Imported liquefied gas shut-off valvePrinciple and structure:

1. When the handwheel rotates clockwise, the valve stem moves downward and the valve disc descends to seal the sealing surface, cutting off the passage When reversed, it opens and the valve stem is raised to the highest point for sealing.
2. This valve has added an upper seal When the valve is in the open state, it has a two-layer sealing effect together with the packing and has a certain protective effect on the packing.
3. This valve uses nylon products as the sealing surface, and the packing is soft formed packing. The upper seal is also made of soft material, and the sealing performance is good.

Application and performance specifications of liquefied gas shut-off valves:

pressure rating		Room temperature test pressure (Mpa)
		housing	seal	Low pressure seal
Nominal pressure (Mpa)	1.6	2.4	1.76	0.6
	2.5	3.75	2.75	0.6
	4.0	6.0	4.4	0.6
Applicable Temperature		-40~+80℃
Applicable Medium		Natural gas, liquefied petroleum gas, etc

Main component materials of liquefied gas shut-off valve:

Part Name	Material
Valve body and valve cover	Carbon steel WCB
Valve stem	Chromium stainless steel Cr13
valve disc	25 # sealing surface nylon 1010
Valve stem nut	Stainless steel, bronze
Packing material	Enhanced polytetrafluoroethylene forming
shim	XB450
Handwheel	Ductile iron