Imported liquid solenoid valve

NegotiableUpdate on 01/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The imported liquid solenoid valve produced by Breuer can be driven by electromagnetic and connected by flange or thread. The structural form can be direct acting and the sealing structure can be direct acting. The pressure range is PN1.6MPa, the nominal diameter is DN3-500mm, and the material can be copper or stainless steel. Due to the wide range of valve applications, the same type of valve can have different combinations in different situations and working conditions. If you are a non professional, please feel free to call our company for consultation. Our company has professional technical personnel to serve you!

Product Details

Product Name:	Imported liquid solenoid valve	Product Model:	Buhrer series
Driving mode:	electromagnetic	Connection form:	Flange, thread
Structural form:	direct-acting	Sealing structure:	direct-acting
Pressure range:	1.6MPa	Nominal diameter:	DN3-500
Common materials:	Copper, stainless steel	Technical Consultation:

Product Introduction The imported liquid solenoid valve produced by Breuer can be driven by electromagnetic and connected by flange or thread. The structural form can be direct acting and the sealing structure can be direct acting. The pressure range is PN1.6MPa, the nominal diameter is DN3-500mm, and the material can be copper or stainless steel. Due to the wide range of valve applications, the same type of valve can have different combinations in different situations and working conditions. If you are a non professional, please feel free to call our company for consultation. Our company has professional technical personnel to serve you! Technical Department Phone: Product Details

BuhrerBrand-Imported liquid solenoid valves can automatically or remotely control the on/off of working medium pipelines such as water, oil, and liquid. Due to the rubber seal used in this valve, the cleanliness of the working medium is greatly reduced, and it has the advantages of rapid opening and closing, high reliability, etc.

the United StatesBuhrerBrand series of imported solenoid valves: direct acting solenoid valve, step-by-step direct acting solenoid valve, medium and low pressure solenoid valve, high pressure solenoid valve, ultra-high pressure solenoid valve, ultra-high temperature solenoid valve, steam solenoid valve, low temperature solenoid valve, anti-corrosion solenoid valve, submersible solenoid valve, gas solenoid valve, gas quick cut-off solenoid valve, gas safety solenoid valve, vacuum solenoid valve, pulse type solenoid valve, self-protection solenoid valve, two position three-way solenoid valve, solenoid valve with manual function, solenoid valve with signal function, etc.

Imported liquid solenoid valveMain technical parameters:

Product Specifications	DN3～DN500
Valve body material:	Brass, stainless steel, etc
Applicable media:	Water, gas, oil, steam, gas, corrosive fluids, etc
Temperature range:	-250℃
Medium viscosity:	Less than 50C St (customized if greater than)
Protective performance:	Waterproof, explosion-proof (Exd IICT5), anti-corrosion
Wiring method:	Wire socket type; Lead type; Plug in type
Control method:	Normally open, normally closed
Power supply voltage:	DC12～127V; AC36～380V
Connection method:	Internal thread, flange
Leakage rate:	zero

Imported liquid solenoid valveWorking Principle:
Normally closed: When the coil is energized, the pilot valve core is engaged, the pilot hole is opened, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve is opened; When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the valve chamber is pressurized by the piston throttle hole and the thrust of the reset spring, and the solenoid valve is closed.
Normally open: When the coil is energized, the pilot hole closes, and the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, causing the solenoid valve to close. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole opens, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve opens.