Imported miniature solenoid valve

Product Name:	Imported miniature solenoid valve	Product Model:	Buhrer series
Driving mode:	Electromagnetic, manual control	Connection form:	Internal thread, flange
Structural form:	Direct acting, piston type, pilot operated	Sealing structure:	Piston type PTFE
Pressure range:	1.6-100MPa	Nominal diameter:	DN1-500
Common materials:	Forged copper, stainless steel, 304, 316, titanium alloy steel, etc	Technical Consultation:

Product Introduction The imported micro solenoid valve produced by Breyer can be driven by electromagnetic or manual control, and can be connected by internal threads or flanges. The structural form can be direct acting, piston type, pilot type, and the sealing structure can be piston type PTFE. The pressure range is PN1.6-100MPa, and the nominal diameter is DN1-500mm. The material can be forged copper, stainless steel, 304, 316, titanium alloy steel, etc. Due to the wide range of valve applications, the same type of valve can have different combinations in different situations and working conditions. If you are a non professional, please feel free to call our company for consultation. Our company has professional technical personnel to serve you! Technical Department Phone: Product Details

This product is a pilot operated structure imported from the United States. The valve core is made of stainless steel piston, and the piston ring will not be stuck by impurities in the medium. It has high dynamic sealing performance and long service life; There is no direct friction between the piston and the metal valve chamber, and there is no restriction on the installation direction of the valve body; Autocratic coil, not easy to burn out; Long term stop action restarts, with equally sensitive action; Zero leakage; The service life is over 1.5 million times.

A series of imported solenoid valves from the Buhrer brand in the United States include brass solenoid valves, step-by-step direct acting solenoid valves, medium and low pressure solenoid valves, high pressure solenoid valves, ultra-high pressure solenoid valves, ultra-high temperature solenoid valves, steam solenoid valves, low-temperature solenoid valves, anti-corrosion solenoid valves, submersible solenoid valves, gas solenoid valves, gas quick cut-off solenoid valves, gas safety solenoid valves, vacuum solenoid valves, pulse type solenoid valves, self-protection solenoid valves, two position three-way solenoid valves, solenoid valves with manual function, and solenoid valves with signal feedback.

Main technical parameters of imported solenoid valves:

Product Specifications	DN1～DN500
Valve body material:	Brass, cast iron, PTFE, Stainless steel, etc
Applicable media:	Water, seawater, gas, oil, steam, gas, corrosive fluids, etc
Temperature range:	-100～+550℃
Medium viscosity:	Less than 50C St (customized if greater than)
Protective performance:	Waterproof, explosion-proof (Exd IICT5), anti-corrosion
Wiring method:	Wire socket type; Lead type; Plug in type
Control method:	Normally open, normally closed
Power supply voltage:	DC12～127V; AC36～380V
Connection method:	Internal thread, flange, external thread
Leakage rate:	zero

Working principle of imported solenoid valve: normally closed: when the coil is energized, the pilot valve core is attracted, the pilot hole is opened, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve is opened; When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the valve chamber is pressurized by the piston throttle hole and the thrust of the reset spring, and the solenoid valve is closed. Normally open: When the coil is energized, the pilot hole closes, and the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, causing the solenoid valve to close. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole opens, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve opens.