Imported pneumatic unbalanced cage type regulating valve

Product Name:	Imported pneumatic unbalanced cage type regulating valve	Product Model:	Buhrer
Drive mode:	Pneumatic, electric	Connection form:	Flanges, welding
Structural form:	Balanced type	Sealing structure:	PTFE,PPL, Wave tube seal
Pressure range:	150~1500LB	Nominal diameter:	DN25-500
Common materials:	WCB, 304316, alloy steel, etc	Technical Consultation:

Product Introduction The imported pneumatic unbalanced cage type regulating valve produced by Breuer can be driven by pneumatic or electric methods, connected by flange or welding, and has a balanced structure. The sealing structure can be made of PTFE, PPL, or corrugated seal, with a pressure range of PN150~1500LB and a nominal diameter of DN25-500mm. The material can be WCB, 304, 316, alloy steel, etc. Due to the wide range of valve applications, the same type of valve can have different combinations in different situations and working conditions. If you are a non professional, please feel free to call our company for consultation. Our company has professional technical personnel to serve you! Technical Department Phone: Product Details

Pneumatic Unbalanced Cage Control Valve - Buhrer Brand Overview from the United States:
Unbalanced cage type regulating valve is a single seat sleeve type regulating valve. The valve core has no pressure balance hole, the valve body structure is compact, the fluid channel is S-shaped, and there is a guide wing to improve the smooth flow of fluid around the sleeve. It has low pressure drop loss, large flow rate, wide adjustable range, and is resistant to cavitation corrosion

The accuracy of the flow characteristic curve is high The regulating valve has excellent sealing performance, and the leakage of the valve seat is equivalent to that of a single seat valve. The regulating valve is equipped with a multi spring thin film actuator, which is compact in structure and has a large output force

It can be widely applied to occasions that require low noise, minimal cavitation and corrosion, and strict sealing requirements

Standard specifications:

Nominal diameter: DN25-500
Nominal pressure: ANSI 125LB~1500LB
Connection form: flange, welding
Applicable temperature: -196~+566 ℃

Main performance:

Leakage rate: Metal valve seat: meets the standard ANSI Bl6.104 Class IV, less than 0.01% of rated Cv
Return difference: 3% (without locator); 1% (with locator)
Linear: ± 5% (without locator); ± 1% (without locator)
Note: Standard V-shaped polytetrafluoroethylene genuine material is used