Imported sewage treatment ammeter

NegotiableUpdate on 08/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Imported sewage treatment ammeter

Product Details

Imported sewage treatment ammeter SCD-8200

Imported sewage treatment ammeter SCD-8200Product features:

◇Optimize flocculant dosage

◇Reduce the cost of coagulant addition

◇Stable effluent quality

◇2 x Hi/Lo alarm output

◇Zero point automatic calibration

◇4-20mA current inputgo out

Product principle:

The electric motor drives the piston to perform reciprocating motion in the sensor cylinder, maintaining continuous flow of the water sample while generating shear action, making the charged ions surrounding the colloidal particles in the water become free charged ions. The movement of these charged ions charges the electricity below the cylinder, generating alternating currents between the electricity, which is called flowing current.

Technical parameters:

model	SCD8200
Measurement parameters	streaming current
power supply	100-240VAC，50Hz
measuring range	-1000 ~ +1000mV
accuracy	0.1%
display	LED digital display
velocity of flow	1 L/min
connect	Inlet pipe 1/2 ', outlet pipe 3/4'
response time	1
Self diagnosis	Sensor LED
Sensor material	Delrin/316SS/PTFE
output signal	4～20mA，-10～+10V，0～10V
communication	MODBUS optional
call the police:	Hi/Lo relay
Protection, etc	IP65
Installation size:	11.0“x 6.00”
Weight:	9kg

It can measure the current of charged ions or particles in the SCD sampling chamber after chemical treatment in water. The magnitude of the current depends on the net residual positive or negative ions left in the water after coagulation. The flowing current value can indirectly reflect the coagulation effect and is used for automatic adjustment and control of flocculant dosage. Superior sensor design ensures long-term zero fault operation of the product. Typical applications include industrial/municipal water treatment, sludge sedimentation dewatering/pressure filtration, reverse osmosis system pretreatment, and other processes that require the addition of coagulants.

Scope of application:Mainly used to optimize the water treatment process of adding coagulants, it can continuously monitor and control the amount of coagulants added.
The inlet flow rate of the sensor is 1 gallon per minute, and both the inlet and outlet are quick couplings. The inlet is 1/2 'and the outlet size is 3/4'
The transmitter is packaged in a NEMA 4x non-metallic instrument box with a locking design, suitable for outdoor installation.