Imported ultra-high pressure solenoid valve

Product Name:	Imported ultra-high pressure solenoid valve	Product Model:	Buhrer
Driving mode:	automatic	Connection form:	thread
Structural form:	Piston type, pilot type, direct acting type	Sealing structure:	Soft seal, hard seal
Pressure range:	1.6-100MPa	Nominal diameter:	DN0.5-500
Common materials:	WCB, 304316, alloy steel, etc	Technical Consultation:

Product Introduction The imported ultra-high pressure solenoid valve produced by Breyer can be driven automatically and connected with threads. The structural form can be piston type, pilot type, direct acting type, and the sealing structure can be soft seal or hard seal. The pressure range is PN1.6-100MPa, the nominal diameter is DN0.5-500mm, and the material can be WCB, 304, 316, alloy steel, etc. Due to the wide range of valve applications, the same type of valve can have different combinations in different situations and working conditions. If you are a non professional, please feel free to call our company for consultation. Our company has professional technical personnel to serve you! Technical Department Phone: Product Details

ImportsuperHigh-pressure solenoid valve-the United StatesBuhrerA series of imported solenoid valves are widely used in aerospace, shipbuilding, petrochemicals, water supply and drainage, fire-fighting equipment, food and medical equipment, cleaning equipment, landscape irrigation, humidification equipment, hydraulic equipment, testing equipment, water plants, etc,Work pressure is1.6-100MPaIn the pipeline system.

ImportUltra high pressure solenoid valveProduct Features:

The valve cores are all stainless steel piston type, and the piston rings will not be stuck by impurities in the medium, with high dynamic sealing performance,Long lifespan; There is no direct friction between the piston and the metal valve chamber, and there is no restriction on the installation direction of the valve body; Autocratic coil, not easy to burn out; Long term disuse, with equally sensitive movements; Minimum starting pressure1.0MPa.

the United StatesBuhrerBrand series of imported solenoid valves: direct acting solenoid valve, step-by-step direct acting solenoid valve, medium and low pressure solenoid valve, high pressure solenoid valve, ultra-high pressure solenoid valve, ultra-high temperature solenoid valve, steam solenoid valve, low temperature solenoid valve, anti-corrosion solenoid valve, submersible solenoid valve, gas solenoid valve, gas quick cut-off solenoid valve, new gas safety solenoid valve, vacuum solenoid valve, pulse type solenoid valve, self-protection solenoid valve, two position three-way solenoid valve, solenoid valve with manual function, solenoid valve with signal function, etc.

Imported ultra-high pressure solenoid valveMain technical parameters:

Product Specifications	DN1～DN500
Valve body material:	stainless steel
Applicable media:	Water, gas, oil, steam, gas, corrosive fluids, etc
Temperature range:	-100～+550℃
Medium viscosity:	Less than 50C St (customized if greater than)
Protective performance:	Waterproof, explosion-proof (Exd IICT5), anti-corrosion
Wiring method:	Wire socket type; Lead type; Plug in type
Control method:	Normally open, normally closed
Power supply voltage:	DC12～127V; AC36～380V
Connection method:	Internal thread, flange, external thread
Leakage rate:	zero

Working Principle:
Normally closed: When the coil is energized, the pilot valve core is engaged, the pilot hole is opened, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve is opened; When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the valve chamber is pressurized by the piston throttle hole and the thrust of the reset spring, and the solenoid valve is closed.
Normally open: When the coil is energized, the pilot hole closes, and the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, causing the solenoid valve to close. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole opens, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve opens.