Imported vacuum solenoid valve

Product Name:	Imported vacuum solenoid valve	Product Model:	Buhrer
Driving mode:	electromagnetic	Connection form:	Flange, thread
Structural form:	Pilot piston type	Sealing structure:	Soft seal, hard seal
Pressure range:	1.6-100MPa	Nominal diameter:	DN1-500
Common materials:	Stainless steel, 304, 316, titanium alloy steel, etc	Technical Consultation:

Product Introduction The imported vacuum solenoid valve produced by Breuer can be driven by electromagnetic and connected by flange or thread. The structure can be a pilot piston type, and the sealing structure can be soft or hard. The pressure range is PN1.6-100MPa, the nominal diameter is DN1-500mm, and the material can be stainless steel, 304, 316, titanium alloy steel, etc. Due to the wide range of valve applications, the same type of valve can have different combinations in different situations and working conditions. If you are a non professional, please feel free to call our company for consultation. Our company has professional technical personnel to serve you! Technical Department Phone: Product Details

Application scope of Buhrer brand imported vacuum solenoid valve: It is widely used in pipeline systems with negative working pressure in metallurgy, petrochemicals, pharmaceuticals, food and medical, urban construction and environmental protection, energy-saving industries, etc.

Imported vacuum solenoid valveProduct Features:
The valve core is made of stainless steel piston type, with a dedicated coil that is not easily burned out; The coil starts the valve core while pulling the piston, and there is no restriction on the installation direction of the valve body. Good sealing performance and zero leakage.

the United StatesBuhrerBrand series of imported solenoid valves: direct acting solenoid valve, step-by-step direct acting solenoid valve, medium and low pressure solenoid valve, high pressure solenoid valve, ultra-high pressure solenoid valve, ultra-high temperature solenoid valve, steam solenoid valve, low temperature solenoid valve, anti-corrosion solenoid valve, submersible solenoid valve, gas solenoid valve, gas quick cut-off solenoid valve, gas safety solenoid valve, vacuum solenoid valve, pulse type solenoid valve, self-protection solenoid valve, two position three-way solenoid valve, solenoid valve with manual function, solenoid valve with signal function, etc.

Imported vacuum solenoid valveMain technical parameters:

Product Specifications	DN1～DN500
Valve body material:	stainless steel
Applicable media:	Water, gas, oil, steam, gas, corrosive fluids, etc
Temperature range:	-100～+550℃
Medium viscosity:	Less than 50C St (customized if greater than)
Protective performance:	Waterproof, explosion-proof (Exd IICT5), anti-corrosion
Wiring method:	Wire socket type; Lead type; Plug in type
Control method:	Normally open, normally closed
Power supply voltage:	DC12～127V; AC36～380V
Connection method:	Internal thread, flange, external thread
Leakage rate:	zero

Imported vacuum solenoid valveWorking principle: Normally closed: When the coil is energized, the pilot valve core is attracted, the pilot hole is opened, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve is opened; When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the valve chamber is pressurized by the piston throttle hole and the thrust of the reset spring, and the solenoid valve is closed. Normally open: When the coil is energized, the pilot hole closes, and the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, causing the solenoid valve to close. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole opens, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve opens.