Industrial iron chip degreaser

Industrial iron chip degreaser, high-speed iron chip degreaserReason:

Potential hazards of cutting fluid and emulsion:

1. In terms of environmental pollution risks,

2. The high liquid content of metal shavings affects the quality and price of recycling,

3. A large amount of metal cutting oil and emulsion are consumed at once, causing huge waste,

4. During the storage or transportation of metal shavings, oil and liquid may drip, causing the ground to become slippery and dirty, posing a safety hazard.

　　The birth and function of industrial iron chip degreaser

The birth, use, and recyclability of iron chip degreaser (cutting oil and emulsion) for reuse.

A large amount of cutting chips (iron chips, aluminum chips, copper chips, stainless steel chips) are generated during the machining process of mechanical machine tools in large, medium, and small enterprises.

These cutting chips (iron chips, aluminum chips, copper chips, stainless steel chips) often adhere to a large amount of metal cutting oil and emulsion.

These cutting oils and emulsions are expensive, and for large, medium, and small enterprises, losing them is a more expensive loss. If

Recycling cutting oil and emulsion can save a lot of unnecessary waste.

　　Working principle of industrial iron chip degreaser:

This machine adopts centrifugal drying, which uses an electric motor driven by a belt to drive the drying drum to rotate at a high speed of 1400 revolutions per minute to dry most of the oil and water. Due to the internal clutch device of the machine, the rotation speed of the inner shaft can be increased from slow to fast, making the processed parts less prone to damage.

When the degreaser is working, it uses eccentricity to throw the oil around the outer wall and above the top, which are the parts that collect the oil. In addition, there are dozens of vertical grooves on the inner wall of the degreaser, arranged uniformly, which can make the liquid flow smoothly, especially when encountering small things,

The residue on the inner wall of the metal wire forms a vacuum space on the outside, which fully removes the oil and allows the metal to easily expand.

　　
Application areas of industrial iron chip degreaser:

Suitable for various metal parts after grinding, cutting, oil washing, washing, cooling, and immersion in anti rust solution for dehydration (oil), suitable for drying, dehydration, and degreasing of small hardware parts, electronic parts, iron chips, aluminum chips, and copper chips; All electroplating and grinding factories, hardware lathe processing factories, hardware fastener factories, and necessary dehydration (oil) machines.

　　
Advantages of industrial iron chip degreaser:

★ Quickly remove oil and liquid from cutting chips (iron chips, aluminum chips, copper chips, stainless steel chips), and spin dry metal cutting oil and emulsion

It can be centrally recycled and reused.

★ Shock absorption safety. The clutch starts, accelerates easily, and extends the service life of the electric motor.

★ Precise measurement, smooth operation, centrifugal force generated by high-speed rotation to achieve solid-liquid separation, and rapid drying of metal shavings.

★ Standard knob switch control, and optional work timing function, cover opening power-off protection, and speed control for forward and reverse rotation.

The cutting oil and emulsion thrown out are collected and flow out from the discharge port.

The rotation speed is quite fast, reaching 1400 revolutions per minute, efficient dehydration, oil removal, and rapid recovery of cutting oil.

The operation of the electric control box is simple, and the oil can be quickly removed within 3 minutes to dry the timed wet material.

★ Smooth operation, no need for cement machines and pits, can be placed flat and used with peace of mind.
yle="width: 640px; height: 350px" />