Injection molding machine cooling water tower

Ruilang injection molding machine cooling water tower structural components and characteristics 1. The tower body stress structure The tower body stress structure is steel structure, and the crystal format multi-directional slant support is added, which makes the whole FRP filled round cooling tower rigid, and the maximum operating amplitude is 0.15mm

Structural components and characteristics of cooling water tower for Ruilang injection molding machine

　　

1. Tower structure under stress

　　

The stressed structure of the tower body is a steel structure, and the crystal format multi-directional slant support is added, which makes the whole FRP filled round cooling tower rigid and has a maximum operating amplitude of 0.15mm. The steel structure has taken enhanced anti-corrosion measures, and has been coated with two layers of epoxy asphalt paint or chlorosulfonated polyethylene after galvanizing to ensure that the equipment has excellent corrosion resistance characteristics as a whole.

　　

2. Fan reducer

　　

The material of the fan blades is epoxy fiberglass, and the blades are of the machine core type, filled with foam plastic. The fan has reasonable aerodynamics, large air volume, high efficiency, low noise, and corrosion resistance. The wind duct is of kinetic energy recovery type, with reasonable airflow organization and high efficiency. It is made of fiberglass material, lightweight, high-strength, and corrosion-resistant. The horizontal design of the reducer has the characteristics of low noise, high efficiency, reliable oil lubrication, and easy maintenance.

　　

3. Energy saving motor

　　

This series is a high-temperature circular cooling tower that uses a variable torque, variable pole, and variable speed motor. A variable speed motor can save 40% -50% of electricity annually with a single speed motor. It has flexible operation and management, and can be turned on at high speed when the temperature is high, the temperature is high, or the water equipment humidity drops significantly. On the contrary, it can be turned on at medium or low speed, and at night when the temperature is lower, it can also be turned on at medium or low speed. Users can also choose explosion-proof motors according to their needs.

　　

4. Clean water tray

　　

Another feature of the Ruilang circular cooling tower is a completely tilted water tray, with the lower part of the tray leading directly to the discharge outlet. This "clean water tray" design allows water to be completely drained. Due to gravity, cooling water flows from the high part of the water tray to the low part, while dirt and impurities are easily washed out with the drainage. This design also helps prevent sediment accumulation and microbial growth.

　　

5. Water distribution system

　　

The water distribution system of the Ruilang circular cooling tower consists of high temperature resistant medium and low pressure high-density polyethylene PE pipes and ABS plastic nozzles. The pipe is easy to disassemble and wash. Large caliber nozzle (25mm diameter) is not easily clogged. The nozzle is also equipped with an anti clogging ring that penetrates deep into the pipe to prevent dirt from entering the nozzle. In addition, there is a threaded pipe end cap at the end of the branch pipe, where dirt can be easily cleaned out.