Installation method of bypass pipe: magnetic flap level gauge

NegotiableUpdate on 11/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Installation method of bypass pipe magnetic flap level gauge Overview of bypass pipe installation method magnetic flap level gauge: The bypass pipe is actually an installation method. When installed in a general way and the position of the display board is inconvenient to observe, the display board needs to be moved up or down

Product Details

Installation method of bypass pipe: magnetic flap level gauge

Overview of installation method for bypass pipe magnetic flap level gauge:

The bypass pipe is actually an installation method. When installed in the usual way and the position of the display panel is inconvenient to observe, the display panel needs to be moved up or down. Thus, the bypass tube display type magnetic flip column level gauge was developed, which was also divided into the bypass tube top display type magnetic flip column level gauge (UHZ-68-Cxxa type) and the bypass tube bottom display type magnetic flip column level gauge (UHZ-68-Cxxb type).

Technical parameters of magnetic flap level gauge for bypass pipe installation method:

Measurement range: 150-15000mm
Accuracy: ± 10mm
Work pressure
UHZ-68-C06: less than 6.4MPa
UHZ-68-C07: less than 10MPa
Working temperature: 150 ℃
Medium density: 0.5-2.0 g/cm3
Medium density difference: ≥ 150kg/m3 (measurement boundary)
Environmental vibration: frequency ≤ 25Hz, amplitude ≤ 0.5mm
Follow speed: ≤ 0.08m/s
Medium viscosity: ≤ 0.4Pa. S (viscosity conditions can be improved by jacket heating)
Process connection:
Side mounted flange: DN25/PN6.4, PN10,
Convex surface/HG20592~20635-97, or installation size specified by the customer.