Installation process and position of float valve for stainless steel water tank

The installation process and location of the floating ball valve in a stainless steel water tank. The floating ball valve in a stainless steel water tank is mainly used to automatically control the liquid level in the tank, ensuring that the water level is not affected by water pressure and that it opens and closes tightly without leakage. It is the main accessory in a stainless steel water tank. The installation process of the float valve: 1. When the stainless steel water tank is at a high water level, the float valve or the automatic control device of the water pump closes the inlet pipe to allow water to enter. 2. The overflow water level should be 50-100 degrees higher than the water level when the float valve is damaged or the automatic control device of the water pump fails, causing excess water to flow out of the water pipe. 3. The low water level should be 200-500 above the bottom of the stainless steel water tank, and it is advisable to maintain the safe capacity of the stainless steel water tank to avoid emptying and affecting use. At the same time, it should be 100-500 above the top of the water pipe 4. The bottom of the water outlet pipe should be no less than 50 degrees higher than the bottom of the stainless steel water tank to ensure the quality of the effluent. 5. The effective volume of the stainless steel water tank should be the volume between the bottom of the outlet pipe and the water level. When the diameter of the inlet pipe is greater than or equal to 50, two inlet pipes and a float valve should be installed, and the two pipes should be kept at the same horizontal plane with a net distance of not less than 200. Scsxccom