Intelligent Hot Wire Tester ZRS-2C

Intelligent hot wire testerZRC-2C

Product Overview:

The hot wire tester is based onIEC60695-2-10：2000IEC60695-2-13 GB4706.1-2008

Designed and manufactured according to standards.

1Technical parameters:Control method:PLCTouch Screen(7Inch color screen)

2；

3Operation type: electronic remote control;Heating wire:Ø4mm±0.04mm，Ni/Cr(Composition ratio77/20)

4；50Heating wire temperature range:1000℃～℃(Digital display)

5；Temperature fluctuation:<>

6Degree;Thermocouple:Ø1mm，K

7Type, imported insulated high-temperature armored thermocouple;Current regulation range:0~160A

8；The force applied by the heating wire to the sample:0.95N±0.1N

9；Heat wire depth:7mm±0.5mm(Micro electromagnetic control,The depth of ironing can be adjusted fine)

10；Sample car driving method: DC motor driven ball screw,The sample car runs at a constant speed,

11Stable;Sample movement speed:10mm/s～25mm/s

12；Burning time:0~99.99s(Digital display can be pre-set)

13；Ignition time:0~99.99s(Digital display can be pre-set)

14；Flame extinguishing time:0~99.99s(Digital display can be pre-set)

15；Ignite the laying pad: thick10mmThe pine board is covered with standard silk paper（12g/m2～30g/m2

16）；Internal volume of the box:0.5m3(0.75m3perhaps1m3optional)

17；. External dimensions:wide1170mm*deep630mm*tall1330mm

18；Shell material:

19Iron plate spraying;Exhaust hole: Ø100mm

20；Working power supply:220V，