Iron ore quantitative feeding belt scale

Introduction to Iron Ore Quantitative Feeding Belt Scale:

The iron ore quantitative feeding belt scale is a high-tech product that integrates conveying, weighing and measuring, and quantitative control. Capable of adapting to various production environments, continuously feeding and measuring various block, granular materials (such as limestone, iron powder, clay) and powdered materials (such as fly ash, cement), providing accurate measurement data for production control and management in various industrial sites.

The iron ore quantitative feeding belt scale adopts a whole machine scale frame. The material is fed from the tail receiving section and passes through the weighing section of the scale body while the belt is running. The instantaneous weight and running speed of the material are measured by the weighing sensor and speed sensor respectively, and sent to the weighing controller for processing. The instantaneous flow rate of the material is obtained, and after software calculation, the PID control signal is output. Through frequency conversion adjustment, the speed of the feeding equipment or batching scale is controlled to achieve the set requirements of the material flow rate.

Basic configuration of iron ore quantitative feeding belt scale:

① Scale frame, belt ② frequency converter, correction device ③ speed and weighing sensor ④ motor reducer ⑤ control cabinet, signal line ⑥ axial movement, driven roller ⑦ idler roller ⑧ internal and external cleaner

Application scope of iron ore quantitative feeding belt scale:

Can be used in industries such as cement, metallurgy, chemical, grain, building materials, etc

Main parameters of the iron ore quantitative feeding belt scale:

Measurement control accuracy: Dynamic measurement accuracy is better than 1.0%; The static measurement accuracy is better than 0.5%, and the precision type can reach 0.125%;

Working mode: continuous automatic;

Working voltage: 380VAC ± 10% 50Hz ± 2Hz

Environmental temperature: -10 ℃ to 45 ℃;

Interface signal: 0-10V or 4-20mA;

Communication interface available: RS485/RS232

Ordering Notice:

1. Material Name:_______

2. Accurate flow range from ____ (* * * small flow) t/h to _____ (***** flow) t/h, commonly used flow rate is _____ t/h

3. Material type: Particle size ____ Specific gravity ____ Humidity____

4. Axis center distance:____

5. Control accuracy:____

6. Other requirements:____

Variable frequency speed belt scale, belt quantitative feeder, quantitative belt scale, closed quantitative feeder, and closed belt batching scale use this instruction