IviCycle C030/C200 Battery Cycle Tester

IviCycle C030/C200Series is a multi-channel electrochemical workstation/Battery cycle tester, each module8Number of channels, total32Channel, using standard19Inch rack. Built in data security module, so even if communication is interrupted or the computer crashes, measurements will continue and data will not be lost. An optional AC impedance analyzer can measure the AC impedance of all channels simultaneously.

Data security and connectivity

l Data is stored on a data card independent of the computer

l Can connect multiple computers

software

IviCyclepass throughIviumSoftSoftware control, equipped withIVIUMAlmost all measurement and analysis functions of electrochemical workstations.IviCycleIt can also be done byLabVIEWTM, C++, DelphiControlled by third-party software.

l Can independently control a certain channel

l All channels are measured simultaneously

l Start measuring synchronously

l Different channels can be plotted separately or displayed in one graphic

performance

- Maximum current:±30mA/±200mA

- Maximum output voltage:±10V

- Electrode connection: Four electrodes

- Constant potential instrument bandwidth:>500kHz

- Stability setting: High speed/standard/High stability

- Signal acquisition: dual channel16-bit ADC，100kA data point/second

Constant potential mode

- Range of applied potential:±10V

- Precision of applied potential:0.2%perhaps1mV

- Current range:±10nA - ±100mA

- Measurement current resolution: current rangex0.015%, the smallest1pA

- Measurement accuracy of current:0.2%

galvanostat

- Applied current resolution: current rangex0.033%

- Accuracy of applied current:0.2%

- Control current mode:±10µA - ±100mA

- Potential range:±1mV, ±4mV, ±10mV, ±40mV, ±100mV,±400mV,±1V, ±4V, ±10V

- Measurement potential resolution: potential rangex0.03%, the smallest75nV

- Measurement potential accuracy:0.2%perhaps1mV

AC impedance analyzer

- Frequency range:10µHz - 20kHz

- Amplitude:0.15mV – 1VThe current mode0.03% - 100%

Electricity meter

- Input impedance:>1000Gohm //<20pF

- Input bias current:<20pA

- Bandwidth:>5MHz

Environmental requirements

- Power Supply:100-240V, 50-60Hz, 120VA

- Interface:USB/LAN(Ethernet)

- External dimensions:44 x 26 x 22 cm

- Weight:12.5kg

- computer:WIN10

Built in data security module: Data collection time: Minimum2msStore data points:20Mindividual/Per channel