Welcome Customer !

Membership

Help

Shanghai People's Electric Appliance Factory
Custom manufacturer

Main Products:

ybzhan>Products

Shanghai People's Electric Appliance Factory

  • E-mail

    1027607493@qq.com

  • Phone

  • Address

    No. 152 Panyuan Road, Changxing Town, Chongming District, Shanghai

Contact Now

KBO-12C KBOD-M25/32C Control and Protection Switch

NegotiableUpdate on 10/22
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

KBO-12CKBOD-M25/32C control and protection switch electrical equipment is mainly used for AC 50HZ (60HZ), rated power operating voltage of 690V, rated current of 100A in power systems under normal conditions for connection, loading, and disconnection, as well as specified abnormal conditions for current (such as short-circuit current).

Product Details

1、 Product Overview

The KBO-12C KBOD-M25/32C control and protection switch adopts a new energy-saving technology for control and protection. The electromagnetic system of the switch adopts a switch cabinet suction current circuit, and the switch electromagnetic system adopts AC starting. The DC suction working mode is controlled by a microcontroller. The iron core loss and short-circuit ring loss of the switch electromagnetic system are minimized, and the copper loss of the coil is only about 4% of the original, which greatly saves energy and reduces the temperature noise of the switch electromagnetic system.

2、 Product Model Meaning Diagram

产品型号意义图

3、 Product selection parameters

Auxiliary Contact Selection Table
code name Number of contact pairs
2 2 normally open+1 normally closed+2 alarms
6 3 normally open+2 normally closed+2 alarm
10 1 normally open+1 normally closed
09+02 4 normally open+5 normally closed+2 alarms
09+06 5 normally open+3 normally closed+2 alarms
00+02 3 normally open+3 normally closed+2 alarms
00+06 4 normally open+4 normally closed+2 alarms
10+02 3 normally open+2 normally closed+2 alarm
10+06 4 normally open+3 normally closed+2 alarms
4、 Applicable standards for product environment

Environmental temperature changes

The maximum temperature cannot exceed+40 ℃;

The minimum temperature shall not be lower than -5 ℃;

The daily average temperature does not exceed+35 ℃;

The height of the installation point should not exceed 2000 meters.

Atmospheric conditions: When the surrounding air temperature is+40 ℃, the relative humidity of the atmosphere will not exceed 50%; When the temperature is low, the relative humidity may be high. When the monthly average low temperature is+25 ℃, the average monthly relative humidity is 90%.

Pollutant level: Level 3.

The power control voltage should be within the fluctuation range of Us (85%~110%).