LX3-11K LX3-11H travel switch open protective type

1、 Product Overview

The structure of the LX3 series travel switch is divided into two types: direct acting, opening, and protective.

The LX3 series travel switch is suitable for control circuits with AC 50Hz, voltage up to 380V, and DC voltage up to 200V. It is used to control the travel or change the direction or speed of motion of motion mechanisms with a speed of not less than 0.1 meters per minute. This travel switch is designed, manufactured, and inspected in accordance with GB14048.5 standard.

2、 Product model meaning

3、 Applicable conditions for product environment

The travel switch should work normally under the following conditions:

1. Altitude not exceeding 2000 meters;

2. The temperature range of the surrounding air is not higher than+40 ℃ and not lower than -5 ℃, and the average value within 24 hours is not greater than+35 ℃.

3. Relative humidity of the air: The average maximum relative humidity in the wettest month is 90%, and the average minimum temperature in that month is 25 ℃, taking into account the condensation that occurs on the surface of the product due to temperature changes;

4. Places without significant shaking and impact vibration;

5. In a medium without explosive hazards and without gas or dust that can corrode or damage insulation;

6. In places without rain or snow invasion;

7. Any installation angle.

4、 Product Technical Parameters