LAUDA H20S oscillating constant temperature water bath at 10 to 100 ℃

LAUDA H20S oscillating constant temperature water bath 10 to 100 ℃ detailed introduction:

The LAUDA Hydro vibrating water bath can perform various tasks in the laboratory according to demand. The H 20 S and H 20 SW models are designed for linear oscillatory vibration motion, while the H 20 SOW model moves the sample along a circular trajectory.

The built-in speed regulator can achieve stepless adjustable vibration that is not affected by load, and has a soft starting process. Two types of vibrating water baths Both H 20 SW and H 20 SOW come standard with cooling coils.

By connecting to a household water supply system or circulating cooler (e.g LAUDA Microcool）， The temperature range of this vibrating water bath can be extended down to 10 ° C. There is a discharge plug used on the back.

LAUDA H20S oscillating constant temperature water bath at 10 to 100 ℃

Order number: L003005

LAUDA Hydro H 20 S water bath features:

1. Can accurately reproduce temperature, set and display temperature values in units of 0.1 ° C.

2. Easy to read LED display screen, thin film keyboard with concise symbols

3. Vibration device with gentle start and overload protection, soft start, adjustable speed

4. Single point temperature controller with electronic monitoring, over temperature protection and water shortage protection functions

5. The vibration device is guided by corrosion-resistant special ball bearings and performs linear swinging vibration motion

6. Easy to remove the vibrating basket for cleaning

7. Bath cover frame with condensate channel, bath with drain valve

8. The insulation cover is made of stainless steel, with a double-layer inner wall and a curvature to prevent condensed water from dripping back into the container

9. The interior of the bath, the bath cover, the oscillating blue, and the heating element are all made of stainless steel, and the cover and perforated tray are standard configurations.

LAUDA Hydro H 20 S operating temperature range:

The heating device of the LAUDA Hydro water bath is directly located below the sieve bottom, ensuring uniform temperature distribution and quickly reaching the desired temperature with high temperature stability of ± 0.1 K. The heating power can be adjusted according to the size of the water bath.

All water baths can provide a temperature range of up to 100 ° C and can be used within the boiling point range. There is a timing function that allows for setting a delayed startup, as well as setting the duration after enabling the delay and reaching the set temperature.

The brand new modern 3.5-inch high contrast TFT display screen is easy to operate.

All Hydro water baths have anti overheating and anti dry burning functions. If an error occurs, the heater will turn off and sound an audible and visual alarm to ensure reliable and continuous operation.

The LAUDA Hydro series comes standard with a dual insulated bath cover, which has a curved interior to prevent condensate from flowing back into the water bath and dripping onto the sample. Moreover, the design of this bath cover will reduce the level of heat loss

Other products in the same series:

Other product sizes in the same series:

Optional accessories

1. A stainless steel test tube rack with 243 openings with a diameter of 18mm, A000018

2. A stainless steel test tube rack with 63 openings with a diameter of 31mm, A000019

3. A stainless steel test tube rack with 372 openings with a diameter of 13mm, A000020

4. Adjustable water level controller, A000024

5. Shaking plate, A000023

6. A 15mm test tube rack with a diameter of 12-17mm needs to be used in conjunction with a shaking plate, A000032

7. A 50mm test tube rack with a diameter of 25-29mm needs to be used in conjunction with a shaking plate, A000033

8. 25ml conical flask clamp, to be used in conjunction with a shaking plate, A000025

9. 50ml conical flask clamp, to be used in conjunction with a shaking plate, A000026

10. 100ml conical flask clamp, to be used in conjunction with a shaking plate, A000027

11. 200ml conical flask clamp, to be used in conjunction with a shaking plate, A000028

12. 250-300ml conical flask clamp, to be used in conjunction with a shaking plate, A000029

13. 500ml conical flask clamp, to be used in conjunction with a shaking plate, A000030

14. 1000ml conical flask clamp, to be used in conjunction with a shaking plate, A000031

15. A 1000ml conical flask with a raised lid needs to be used in conjunction with a shaking plate, A000038

16. Efficient algae removal agent, used together with water in a constant temperature bath to reduce bacterial and fungal contamination

Algizid Aquastab, 5L, LZB129

Algizid Aquastab, 1L, LZB429

Algizid Aquastab, 100mL, LZB929

After sales commitment service:

Warranty period: 1 year

Can the warranty period be extended: Yes

Warranty Maintenance Commitment: Provide one-year free warranty and lifetime maintenance service for the products sold

Repair commitment: 24-hour telephone service