-
E-mail
wxslsck@126.com
-
Phone
15852523519
-
Address
Room 604, Building 21, 588 Jianghai East Road, Chong'an District, Wuxi City
Product Categories
Wuxi Slosen Measurement and Control Technology Development Co., Ltd
LDB explosion-proof silicone rubber flexible electric heating plate, silicone rubber heater, Wuxi silicone rubber electric heating plate
NegotiableUpdate on 12/31
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
LDB explosion-proof silicone rubber flexible electric heating plate is a heating product used for electric tracing of oil tanks, tanks, and containers. It is designed and manufactured according to increased safety explosion-proof requirements and can be used in explosive gas T3 group locations in Zone 1 and Zone 2 of the factory.
Product Details
Detailed Introduction
1. Explanation:
LDB explosion-proof silicone rubber flexible electric heating plate is a heating product used for electric tracing of oil tanks, tanks, and containers. It is designed and manufactured according to increased safety explosion-proof requirements and can be used in explosive gas T3 group locations in Zone 1 and Zone 2 of the factory.
2. Product structure and working principle:
The disturbance electric heating plate is composed of heat-resistant rubber, uniformly distributed metal heating elements, grounded metal, and explosion-proof power junction box. When the power is turned on, the uniformly distributed electric heating elements dissipate heat through heat-resistant rubber.
3. Product specifications and technical indicators:
model |
Technical Parameter |
|
Dimensions (mm) |
Rated power (w) |
|
LDB-A |
610×305 |
600 |
LDB-B |
610×610 |
1200 |
LDB-C |
1220×610 |
2400 |
| Rated voltage:~200V | Dielectric strength: 1600V/min |
| Insulation resistance 50M Ω | The maximum maintenance working temperature of the tank body is 120 ℃ |
| Product's lowest installation environment temperature: -30 ℃ | Product's highest temperature resistance: 230 ℃ |
| Average surface load of the product: 0.31W/cm2 | Explosion proof grade: e Ⅱ T3 |
| Explosion proof certificate: GYB04651X | Zui small bending radius: 0.7m |
4. Product features:
a、 Lightweight and easy to install: Installing a disruptive electric heating plate only takes 20 minutes; The renovation of old equipment does not require the complete destruction of the original insulation layer of the container. Only a portion of the insulation layer needs to be opened at the adhesive site.
b、 High thermal efficiency: Because the disruptive electric heating plate is tightly attached to the surface of the tank, it has good thermal conductivity.
c、 Strong adaptability: The disruptive electric heating plate has a wide range of adaptability to container shapes and does not require any modifications to the container (such as drilling holes).
d、 Can be used indoors, outdoors, and in explosive gas areas in Zone 1 and Zone 2 of the factory.
b、 High thermal efficiency: Because the disruptive electric heating plate is tightly attached to the surface of the tank, it has good thermal conductivity.
c、 Strong adaptability: The disruptive electric heating plate has a wide range of adaptability to container shapes and does not require any modifications to the container (such as drilling holes).
d、 Can be used indoors, outdoors, and in explosive gas areas in Zone 1 and Zone 2 of the factory.
5. Product application scenarios:
Disturbing electric heating plates can be widely used for heating, insulation, and antifreeze of tanks, reaction towers, distillation towers, and related containers in industries such as petroleum, chemical, food, and machinery.
Attention: If the medium inside the tank is a product that is not resistant to high temperatures, or if the tank body is made of non-metallic materials, do not use the disturbing electric heating plate casually. If you want to use it, you must consult with the manufacturer.
Similar Product Recommend