Large caliber plastic bottle sealing machine

1. The large-diameter plastic bottle sealing machine belongs to the fully automatic sealing machine, which is developed and designed according to the different needs of the factory. It has a beautiful appearance, exquisite structure, easy operation, and tight sealing.
2. The automatic sealing machine for wide mouth plastic bottles adopts the integration of light and electricity, constant temperature heating, built-in sharp toothed knife, and powered by air pressure.
3. Instantly press down, cut off the sealing film, with beautiful and smooth sealing effect, photoelectric identification, and automatic waste discharge.
4. Easy to operate, low failure rate, wide mouth plastic bottle automatic sealing machine is a good equipment for sealing boxes, cups, plastic bottles, etc.

1. Choose a flat tabletop, place the machine steadily, and open the chassis legs to make the machine panel easier to observe.
2. Insert the plug on the handheld sensor head into the socket on the panel and tighten it. Pay attention to locating the gap.
3. Insert one end of the power cord plug into the socket on the back panel of the chassis and the other end into the power supply socket. Please make sure to use a single-phase three wire power supply.
4. Turn on the "POWER SW." button on the back panel of the computer case, press the "SWITCHING" button on the panel, and wait for the "WARM UP" green indicator light to turn on before the machine can start working.
5. Press and hold the "Setting BUTTON" button to set the appropriate value, usually between 0.5-2.0 seconds.
6. Place the induction head on top of the container lid, press the start button on the handle, and the red "Heating" indicator light will turn on, indicating that heating is in progress. Do not move the induction head away. After the red "Heating" indicator light goes out, move the induction head away.