【Remarks】:
Technical Specifications:
| Temperature zone composition |
8 temperature zones 16 heating 2 cooling |
| Heating zone length |
2900mm |
| Temperature control range |
Room temperature -360 ℃ |
| Temperature control accuracy |
±1℃ |
| Three point temperature difference |
±2℃ |
| warm-up time |
≤20min |
| cooling method |
Forced cold air (optional water cooling) |
| PCB size |
50-400mm; non-standard models can be customized (Max 500mm) |
| PCB transmission height |
900±20mm |
| transmission method |
Chain track and mesh belt conveyor |
| transmission direction |
L → R (R → L optional) |
| transmission speed |
0-1800mm/min |
| Range of chain track width adjustment |
50-400mm; non-standard types can be customized |
| Mesh belt width |
520mm |
| Power outage protection |
UPS for Conveyor & PC |
| power supply |
AC three-phase 380V 50Hz |
| abnormal alarm |
Abnormal temperature alarm |
| Normal/startup power |
11/55 kw |
| Body size mm |
4950L*1360W*1600H |
| net weight |
1800kg |
| oxygen concentration |
－ |
|
|
|
R series main component configuration list:
| control system |
Siemens CPV, SIMA temperature control module; (Alternatively, Comrade Technology's independently developed control system can also be selected) |
| software |
Comrade Technology's independent research and development |
| computer |
HP or Lenovo P4 or above configuration, 15 inch LCD display |
| circuit breaker |
Schneider, France |
| solid state relay |
Yangming in Taiwan; (Korean Deco optional) |
| intermediate relay |
Omron Japan |
| insurance |
Chint |
| Single item empty opening |
Schneider, France |
| transport motor |
Panasonic Japan |
| Circulating motor |
Taiwan San Yue |
| heater |
Taiwan Longxing, with a warranty of 100000 hours |
| transport motor |
South Korean SPG |
| UPS |
Taiwan Mountain Special |
| frequency converter |
Taiwan Delta |
| wire |
High temperature national standard line |
| Temperature sensor and connector |
OMEGA, USA |
The unique features of R series reflow soldering:Advanced heating system
Heating method, uniform temperature, good thermal compensation, high efficiency, energy-saving, fast heating speed, especially suitable for soldering large BGA and CSP components.
Wind turbine design ensures stable wind pressure.
Each temperature zone adopts forced independent circulation, independent control, and upper and lower heating methods to ensure accurate and uniform furnace temperature and large heat capacity.
The upper cover of the furnace body is lifted by an electric motor, which is safe and convenient for cleaning and maintenance.
Temperature difference, PCB board automatic tracking system (board drop detection), fan abnormal alarm function, fault diagnosis, sound and light alarm.
The temperature rises rapidly, from room temperature to working temperature ≤ 20 minutes.
Imported high temperature resistant, high-speed, anti-interference motor, smooth air flow, low vibration, and low noise.
A safe and stable transportation system
Chain and mesh belt synchronous and constant speed parallel transportation, computer closed-loop control, with an accuracy of ± 1.5%.
The guide rail is made of aluminum alloy, with high strength, high hardness, small deformation, and high precision.
Automatic refueling is controlled by a computer, ensuring smooth and reliable transportation, and extending the service life of chains and guide rails.
Fresh air supply system
Uniform supply of fresh air in each district, maintaining stable air pressure, large heat capacity, and high compensation efficiency.
Rosin Recycling Management System
The drawer style design of the flux filter allows for easy removal and cleaning.
■ Forced cooling system
The cooling rate in the cooling zone is 6-8 ℃/sec, the solder dots are smooth and shiny, and the temperature of the PCB board at the outlet is less than 70 ℃
Powerful program software control system
The delay switch protection function ensures even cooling during shutdown, preventing deformation of transmission components due to uneven cooling.
Power off protection function ensures that the PCB board can output normally without damage after power failure.
PCB board online counting function.
Independent PID control is applied to each temperature zone, allowing for online temperature measurement of PCB boards and real-time analysis, retrieval, and printing of data curves
The transmission system is controlled by a computer closed-loop system, and the transmission speed and fan speed are infinitely adjustable by the computer.
Automatically monitor and display the working status of equipment, and test various interfaces of the equipment.
■ Quadruple protection system
Reliable leakage protection: using Chint leakage protectors to ensure the safety of operators and control systems;
Automatic delay protection system: Built in UPS ensures that the control system and the soldered PCB board are not damaged in the event of sudden power failure;
High temperature cover protection: When the temperature exceeds the limit, the machine casing and furnace chamber can be quickly opened to ensure that the equipment and PCB board are not damaged;
Sound and light alarm function: automatic alarm display for machine faults, fault records can be stored for easy maintenance and repair.
|
