Lide domestic laser alignment instrument replaces imported high-precision 0.01mm

Lide domestic laser alignment instrument replaces imported high-precision 0.01mmLide NIEDOXLASER series laser alignment instrument installation process coaxiality detection and LASER05 is an intelligent device adjustment guidance equipment. It measures coaxiality parameters through any three points, automatically calculates adjustment parameters based on test results, and guides construction personnel to install and adjust to ensure equipment installation accuracy and accuracy

Ensure the safe operation of the equipment.

Technical Specifications:

Explanation:

1. Laser head fixationThrough the chain+VThe type installation bracket or magnetic bracket fixes the measuring unit on the shaft. Translate into EnglishSunitFixed at the reference end (usually a gearbox, pump, etc., fixed during adjustment)MUnit fixed inAdjustment end (usually for power equipment such as motors, the adjustment process is achieved by adjusting the height and left and right positions of the feet)Alignment adjustment), and the side marked with letters of each measuring unit faces upward.

2Data zeroingPress the power switch to turn on the laser head and rotate it separatelySTheMThe laser adjustment knob on the end allows forEach laser is directed towards the zero point position of the opposing laser head, and the number of positions displayed on their respective screens is observedAdjust displacement data as much as possible based on values and displacements0 Nearby, not necessary.

Vertical adjustment: Rotate the axis to be aligned so that the laser head display angle is less than or equal to ±75°(Suggested conditions)When allowed, try to reset the angle to zero. Adjust the shims according to the instructions in the diagram to achieve displacement and openingThe angular deviation is close to0.Horizontal adjustment: Rotate the axis to be aligned so that the laser head displays an angle greater than or equal to ±25°(Suggested conditions)When allowed, try to adjust the angle to ±90°）Adjust the indicator direction up and down according to the diagram, so thatThe displacement and opening angle deviation are close to0.After the adjustment is completed, click on "remeasure" and repeat the above steps until both the vertical and water quality deviations are within the required rangeWithin the scope.*Definition of horizontal up and down adjustment indication: The indication direction is to overlook the adjustment unit from above, fixed endThe gearbox, pump, etc. are on the left side, and the regulating end (motor, motor, etc.) is on the right side.

Lide domestic laser alignment instrument replaces imported high-precision 0.01mmPacking Listserial numbernameunitquantity1 Display unit (tablet)Taiwan1 2 Laser head S/M endto1 3 VType installation bracketto1 4 Magnetic installation bracketto1 5 Install the chainset2 6 Extend the guide rodset2 7 chargera1 8 Certificate of Conformitycopy1 9 Packing Listonly1 2、Multiple fixture forms can be optionally expanded, supporting offset brackets, magnetic suction bases, sliding brackets, and other methods of use