Lubricating oil kinematic viscosity

The instrument loads the sample into a capillary viscometer under the conditions specified in the national standard GB 265-88, heats the water bath to the set temperature, and maintains it constant. Place the appropriate capillary viscometer in a temperature controlled bath and let it stand still. When the temperature reaches equilibrium, manually press the directional keys to start the experiment. After the experiment is completed, the instrument automatically calculates the test results and the experiment ends.

l• Applied to departments such as power, petroleum, chemical, commercial inspection, and scientific research;

l• Applied to oil products that require determination of their motion characteristics;

lSuitable for testing the kinematic viscosity and intrinsic viscosity of oil products.

lMicrocomputer control, automatic constant temperature.

lImported true color LCD display.

lPID temperature control technology has high temperature control accuracy.

lImported temperature sensor with sensitive response.

lConfigure lighting for easy observation of data.

lOptional refrigeration equipment for measuring low-temperature viscosity.

Environmental temperature: 5 ℃~40 ℃

Environmental humidity: ≤ 85%

Power supply: AC 220V ± 10% 50Hz ± 10%

Heating power: ≤ 1500W

Dimensions: 510mm × 360mm × 470mm

Weight: 20Kg

Temperature control range: (0-120) ℃ (0-room temperature requires additional refrigeration)

Temperature control accuracy: ± 0.05 ℃

Resolution: 0.01 ℃

Experimental holes: 4 holes

Display mode: LCD display

Clock display: year, month, day, hour, minute (working in power failure)

lAccessories Guide

lType viscometer (standard)

lCounter current viscometer (optional)

l

Precautions

If obvious faults are found in the instrument, contact the manufacturer in a timely manner,

Users are prohibited from opening and repairing it on their own.

If there is no display when turned on, please check the three core power cord interface at the back of the instrument

Is the fuse in place? If the fuse is broken, it should be replaced

Dangerous silk.

3. During each experiment, water should be added to the bathtub before opening it

power switch.

4. Before each experiment, a calibrated standard thermometer should be used to measure the instrument

Calibrate the displayed temperature and promptly correct any deviations.

Lubricating oil kinematic viscosity

Lubricating oil kinematic viscosity