M100 Multi functional Integrated Distillation Instrument

1、 The M100 multifunctional integrated distillation instrument is a multifunctional distillation instrument (ammonia nitrogen distillation instrument, volatile phenol distillation instrument, cyanide distillation instrument) that uses the latest far-infrared heating method internationally. It has the advantages of high thermal efficiency, long service life, fast temperature rise and cooling speed, adjustable heating time and heating power. The instrument can be connected to an external circulating water cooling device. The entire system is simple and easy to install and maintain

1M100 Multi functional Integrated Distillation InstrumentProduct Usage

The multifunctional distillation apparatus (ammonia nitrogen distillation apparatus, volatile phenol distillation apparatus, cyanide distillation apparatus) adopts the latest far-infrared heating method in the world, which has the advantages of high thermal efficiency, long service life, fast temperature rise and cooling speed, adjustable heating time and heating power. The instrument can be connected to an external circulating water cooling device. The entire system is simple, easy to install and maintain, and reliable to use. It can be widely used in the pre-treatment process of sample analysis that requires distillation in industries such as environmental protection, chemical, pharmaceutical, and materials. It can be widely applied in the field of detection, such as distillation treatment of volatile phenols, cyanides, ammonia nitrogen, Kjeldahl nitrogen, water in oil and other items.

IIM100 Multi functional Integrated Distillation InstrumentTechnical Indicators:

1. It can distill 6 samples simultaneously and can be controlled by a single well.

2. The heating power can be adjusted at intervals of 100 watts, with a maximum heating power of 1000 watts per unit.

3. The heating time can be adjusted, with a maximum timing of 3 hours and an interval of 1 minute. In the absence of a timing state, there will be an automatic power-off protection for 20 minutes without operation.

4. Tap water cooling function, while cooling 6 condenser tubes.

5. Power requirement: 220V (16A).

display mode	screen display
Control method	Program controlled PLC
Heating method	far infrared
temperature control	Single hole automatic temperature control from 0 to 400 ℃
time control	0-150min single hole control
heating element	6 heating units
Specifications	500ml×6
rated power	Single Z-type heating power of 1000 watts
cooling method	Circulating cooling of tap water
warm-up time	10～20min
Power supply	220V 50Hz

IIIM100 Multi functional Integrated Distillation InstrumentOperating instructions (ammonia nitrogen)

1. Accurately add 150mL of the sample into 6 distillation bottles and insert a reflux tube at the top of each bottle.

2. Accurately add 100mL of boric acid absorption solution into four receiving bottles, place the receiving bottles at the lower end of the condenser tube below the instrument, and ensure that the silicone rubber tube at the end of the condenser tube is below the liquid level of the absorption solution.

3. Turn on the power switch under each electric furnace. The instrument displays "----" (if there is no operation, it displays HOT). Press the white button on the switch and hold for 2 seconds. At this time, the buzzer will sound and the instrument will display 1000 (full power of the instrument). Rotate the button left and right, and the instrument power will decrease by 100W（Recommend using power below 600W）. After setting the power, press and hold the white button for 2 seconds. At this time, the buzzer will sound and the instrument will display 0:30 (the default heating time of the instrument is 30 minutes). Rotate the button left and right to adjust the heating timing time. The short time is 1 minute, and the long time is 150 minutes. Once the electric furnace reaches the set heating time, the instrument automatically stops heating. If the heating power is changed during the heating process, the timing needs to be reset.

4. Remove the receiving bottle and make up to 250mL, which can be directly used for subsequent titration (remove the receiving bottle in a timely manner to prevent backflow).

When conducting other sample analyses, the timing and heating power should be determined by the user based on experimental requirements and their own exploration.