Martindale testing machine for wooden flooring

Martindale testing machine for wooden flooringUsed to test the wear resistance of various flooring. Under a certain pressure, the sample and abrasive undergo continuous reverse friction, and after a certain number of cycles, the surface wear of the sample is tested. Touch screen control, equipped with a comprehensive programmer that can individually set the count for each test head; Suitable for testingPVC flooring, SPC flooring, WPC flooring, etc.

Applicable standard

EN 16094

productfeature

1. Precision motor transmission drive; stable operation

2. Accurate Lissajous curve;

3. Chinese and English touch screen operation interface

4. Floor testing fixtures that meet the standards

Product Specifications

1. Number of positions:4bit

2. Counting range: 0-9999 times

3. Maximum travel distanceHorizontal 60.5 ± 0.5mm, vertical 24 ± 0.5mm

4. Mass of pressurized material:

5. Clamp:200±1g；

6. Heavy hammer for fabric sample ：395±2g；

7. Furniture Decoration Sample Hammer ：594±2g

8. Stainless steel disc:260±1g

9. Effective friction diameter of grinding block ：

A-type 200g (1.96N) friction head (9KPa) ￠ 28.8-0.084mm

B-type 155g (1.52N) friction head (12KPa) ￠ 90-0.10mm

10. Relative motion speed between gripper and grinding table:20-70r/min (adjustable)

11. Quality of sample pressure hammer: 2385±10g

Product Configuration

Standard configuration:

1. T331One host;

2 floor testing kits,4Set;