Micro Magnetic Powder Clutch TL-POC-C Type

Micro magnetic powder clutchThe torque of TL-POC type is relatively small, and there are four commonly used torque specifications: 0.5Nm, 1Nm, 2Nm, and 5Nm, which are suitable for matching with tension controllers. The heat dissipation method is natural cooling, with a supply starting at 5r/min and a maximum speed of 1800r/min.
miniatureMagnetic Particle ClutchWorking Principle:
1. Magnetic powder clutch and magnetic powder brake are automation devices that change the output speed by controlling the input current;
2. When the coil is energized, the magnetic powder generates magnetic flux under the action of magnetic field lines, causing the input shaft and output shaft to become a rigid body and rotate. When overloaded, slip occurs, which is the working state and achieves the purpose of transmitting torque;
3. When the coil is not powered: the input shaft rotates, and under the action of centrifugal force, the magnetic powder is pressed onto the inner wall of the clamping ring, and the output shaft is not in contact with the input shaft. At this time, it is in an idle state.
The Tailing brand miniature magnetic powder clutch uses magnetic powder particles with heat resistance, wear resistance, and corrosion resistance, so it has good durability. Although its excitation current is small, it can output a large torque and can be easily controlled over a large range. It has the characteristics of small size, light weight, fast response, continuous sliding, stable torque, accurate coil tension control, smooth and quiet operation, good heat dissipation, and long service life. It is widely used in electronic devices, copiers, printers, printing machines and other fields.
Kind ReminderThe micro magnetic powder clutch is fixed on the mounting plate during installation, and then a coupling (with elasticity) is used. Install a synchronous pulley on the mounting plate at the input end and control it within the allowable range of axle load. Suggest expanding the heat dissipation area of the installation board to over 350 square centimeters.

The following is our company's microSpecification of magnetic powder clutchModel size parameter table: