Microporous material hardness tester LX-C foam, sponge, rubber and other low hardness testers

NegotiableUpdate on 05/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

LX-C microporous material hardness tester is one of the pointer type Shore hardness testers produced, which is mainly used to measure the hardness of sponge, foam, rubber microporous materials and other low hardness materials. The travel range of the indenter is 0-2.5mm, and the recommended measurement range is 10-90Hc (Hc is the hardness symbol of microporous material C-type hardness tester). The LX-C microporous material hardness tester is developed and designed strictly in accordance with the relevant provisions of the standard HG/T2489-2007. It is particularly suitable for measuring the hardness of microporous materials for shoes with a compression rate of 50% and a stress of 0.049MPa or above. The measurement stability is good and fast.

Product Details

Product Structure Diagram

The composition structure of LX-C microporous material hardness tester includes tracking pointer, locking screw, dial, pressure foot, and pressure needle. See the figure below

海宝仪器LX-C微孔材料硬度计功能结构图

Precautions before use

1. Before use, it should be checked firstDoes the pointer of the LX-C microporous material hardness tester point to zero in the free state, and if the pointer is slightly offsetZero position,You can loosen the compression screw in the upper right corner, align the dial with the zero position, and then tighten the compression screw.

2. WillLX-C Micro porous Material Hardness TesterWhen pressed on a flat reference surface (glass or metal platform), under normal conditions, the pointer should point to 100 ± 1Hc. If it cannot be accurately displayed, thenLX-C Micro porous Material Hardness TesterCannot be used, please contact the customer service of the mall and send it back to the manufacturer for adjustment.

3. UseLX-C Micro porous Material Hardness TesterThe recommended measurement range is 10Hc-90Hc. If it exceeds this range, it is recommended to use other measurement methods.

SpecificationsSpecs

model	LX-C
Needle stroke range	0-2.5mm
Dial value	0-100Hc
Recommended measurement range	10-90Hc
measurement error	±1Hc
Pressure at the end of the pressure needle	F=0.0784Hc+0.539（N）； Hc is the hardness reading of the microporous material C-type hardness tester
weight	0.16kg
Overall dimensions	112×60×30mm