Mobile phone vibration wear-resistant machine

One,Mobile phone vibration wear resistance testing machineintroduction:

NOKIADesignated dedicated mobile phone surface coating abrasion tester. Used to test the wear resistance of mobile phone casings.

By placing the product in a special liquid mixed with colored stones and medicine,Perform vibration friction,Test the abrasion resistance of the product.

Secondly,handVibration and Wear Resistance Testing Machineparameter

1.Model:HK180/530 TE3

2.Equipment size: high620MM*wide360MMlong640MM

3.Vibration testing machine slot size:125×530mm

4.Weight of vibration testing machine:120kg

5.Vibration motor power1.2 kW；

6.Speed: per minute3000turn

7.Frequency:50HZ

8.Voltage:380V

Three,Mobile phone vibration wear resistance testing machineSupporting materials:

1.Green abrasive particlesRKK 15P 25kg
2.Yellow abrasive particlesRKF 10K 75kg
3.Test solutionFC120 30kg

Mobile phone vibration wear resistance testing machineAppearance inspection:

In the report of wear test results, it is necessary to include the usage time of the wear medium. The correct calculation method for the usage time of wear media is: pre-test time（6Hour)+The time that has been used before this test

Acceptance criteria: Except for keyboard buttons, all visible mechanical components are2Hour, keyboard buttons need to3Hour.

Mobile phone vibration wear resistance testing machineAdditional Information:

The wear resistance of the product is related to the process used. If the process used cannot pass the testing project, then it is necessary to ensure that the quality of the sample is sufficiently good.

Typical wear resistance of general processes or designs:

IMDOn the surface,30~60minute

Spray printing,30~60minute

Sharp angles (soft paint, etc.),1hours