Multi station constant temperature magnetic stirrer

HJ - 9AMulti station constant temperature magnetic stirrerProduct Features:

1. This product uses a DC motor with low noise and smooth speed regulation.

2. The heating plate is made of stainless steel, and the fully enclosed heating plate can be used for auxiliary heating and can be used for long-term heating.

3. It can be mixed in a closed container, making it ideal and convenient to use.

4. The mixer can be set for temperature and temperature display, and can be used for long-term heating. The digital display is intuitive and accurate.

5.It has single point and multi-point simultaneous mixing functions, easy operation, smooth operation, electronic speed regulation, and digital temperature control.

6. Capable of precise and stable stirring of liquid solutions over a wide speed range.

7. Suitable for small volume samples, it is a common tool in petroleum, chemical, pharmaceutical and health, environmental protection, biochemical laboratories, analysis rooms, and educational research.

HJ - 9AMulti station constant temperature magnetic stirrerTechnical Specifications:

1. Power supply: AC220V ± 10%

2. Heating power: 250W × 9

3. Large mixing capacity: 1000ml × 9

4. Timing range: 0-9999min x 9 (optional)

5. Mixing speed: Start -2600r/min

6. Heating plate diameter: ￠ 125mm × 9

7. Temperature range: RT-99.9 ℃

Usage instructions:

1. When using this instrument, first check if the accessories accompanying the machine are complete, place the mixer steadily, then install the fixtures in order, turn off the power switch, turn all speed control knobs counterclockwise to small, turn all heating switches up (off), then plug in the power, turn on the power switch, and the indicator light inside the switch will light up;
2. Place the beaker containing the reagents in the center of a stainless steel plate, and place a stirrer inside the beaker. Then turn on the power speed control switch, and the indicator light will turn on to start working. The speed control is gradually adjusted from low speed to high speed, and it is not allowed to start the speed gear directly to avoid the stirrer not being synchronized and causing jumping.

3. Temperature control: Insert the probe into the socket and adjust the temperature control to the desired level.

4. If you notice that the stirrer is jumping or not stirring during mixing, please cut off the power and check if the bottom of the beaker is flat and the position is correct. Please also test if the current voltage is between 220V plus or minus 10V, otherwise the above situation will occur.

5. After each workstation is used, the speed control knob should be turned counterclockwise to a smaller position, and then the two switches should be turned off to avoid turning on the mixing switch at high speed as much as possible, so as not to cause the mixer to lose rotation and shorten the life of electronic components in the speed control circuit.
6. The heating time should generally not be too long, intermittent use can prolong the service life.

Changzhou Gaode Instrument Manufacturing Co., LtdWe are a professional laboratory equipment manufacturer and a technology-based enterprise that integrates design, production, sales, and service. Strive to achieve perfection and serve people from all walks of life wholeheartedly throughout the entire process. Thank you for your attention! Welcome to further.

This series of products is designed with magnetic stirrers that can be heated at multiple stations, such as two, four, six, eight, ten, etc., according to the requirements of users. Temperature digital display, electronic speed regulation, easy operation, capable of precise and stable stirring of different samples within a wide speed range. It is a common tool in petroleum, chemical, pharmaceutical and health, environmental protection, biochemical laboratories, analysis rooms, education and scientific research.